Log-in lemu.dk

Your access to more than 300,000 different products and a wide range of services

Enter your e-mail address and have your password sent to you:

Cancel
en

LXM32I Modul Eth M12,4In/2Out M8 SRC,STO, VW3M9117

Schneider Electric
{{StockInfo.NotAllowedReason}}
{{stck.StockInfo.RemoteStockLocation.DisplayName}} {{stck.StockInfo.RemoteStockLocation.Amount|number}} {{stck.StockInfo.RemoteStockLocation.Uom}} ({{stck.StockInfo.RemoteStockLocation.DeliveryTimeTxt}})
{{stck.StockInfo.CentralStockLocation.Amount|number}} {{stck.StockInfo.CentralStockLocation.Uom}} {{stck.StockInfo.CentralStockLocation.DisplayName}}
{{stck.StockInfo.CentralStockLocation.DisplayName}} (In stock)
{{stck.StockInfo.CentralStockLocation.DisplayName}} (Not in stock)
{{stck.StockInfo.CentralStockLocation.DeliveryTimeTxt}}
[{{stck.StockInfo.PrimaryStockLocation.DeliveryTimeTxt}}]
{{stck.StockInfo.NotCentralStockDeliveryTimeMsg}}
{{stck.StockInfo.SecondaryStockLocation.DisplayName}}: {{stck.StockInfo.SecondaryStockLocation.Amount|number}} {{stck.StockInfo.SecondaryStockLocation.Uom}}
Special return conditions

Product description

Type no.:
LM no.:
Own product no.:
VW3M9117
7586056322
-
Discount code:
UNSPSC Code:
Customs code:
80080495011
26101310
85176200
Lexium 32i integrated servo drives comprise control electronics with an interface for a CANopen DS402/CANmotion, an EtherCAT communication bus, or an EtherNet (PROFINET) network and a Lexium BMI synchronous servo motor. They can be equipped with a single-turn or multi-turn encoder and an integrated holding brake as required. 2 types of connection are possible: industrial connectors M8 / M12 or with internal spring terminals. Connection module for CANopen or, EtherCAT bus or EtherNet (PROFINET) network (depending on the model) with four logic inputs, 2 logic outputs (only for Ethernet) and STO function - 2 x M12 connectors for CANopen, EtherCAT bus or EtherNet (PROFINET) network - 2 x M8 connectors for STO function - 2 or 4 x M8 connectors for logic inputs, or 2 M8 connectors for logic inputs and 2 M8 connectors for logic inputs/ouputs (only for Ethernet) Connection module for CANopen, EtherCAT bus or EtherNet (PROFINET) network, and outputs (only for LXM32IETH) (depending on the model) with two logic inputs, M8 connectors, and STO function (connection modules with industrial connectors are also available without the STO function) - Connection module with internal spring terminals with eight cable glands (6 x M12 and 2 x M16), four logic inputs, and two logic outputs (cable glands to be ordered separately, see page 11) - Connection for mains supply module available in two versions (for single-phase or three-phase power supply) - Control unit available in three versions: 1. for CANopen DS402/CANmotion bus 2. for EtherCAT bus 3. for EtherNet (PROFINET) network Motor section with power stage comprising: - Casing with RAL 9005 opaque black paint protective coating - A 4-point axial mounting flange available in the following sizes: - 70 mm/2.76 in. - 100 mm/3.94 in. - A smooth or keyed shaft end (depending on the model) - Lexium BMI servo motor comprising a three-phase stator and a 10-pole rotor with Neodymium Iron Boron (NdFeB) magnets

None

;