PressureSensor 0-25 PA / ES 961
Ls Control
{{StockInfo.NotAllowedReason}}
{{stck.StockInfo.RemoteStockLocation.DisplayName}}
{{stck.StockInfo.RemoteStockLocation.Amount|number}} {{stck.StockInfo.RemoteStockLocation.Uom}}
({{stck.StockInfo.RemoteStockLocation.DeliveryTimeTxt}})
{{stck.StockInfo.CentralStockLocation.Amount|number}} {{stck.StockInfo.CentralStockLocation.Uom}}
{{stck.StockInfo.CentralStockLocation.DisplayName}}
{{stck.StockInfo.CentralStockLocation.DisplayName}}
(In stock)
{{stck.StockInfo.CentralStockLocation.DisplayName}}
(Not in stock)
{{stck.StockInfo.CentralStockLocation.DeliveryTimeTxt}}
[{{stck.StockInfo.PrimaryStockLocation.DeliveryTimeTxt}}]
{{stck.StockInfo.NotCentralStockDeliveryTimeMsg}}
{{stck.StockInfo.SecondaryStockLocation.DisplayName}}: {{stck.StockInfo.SecondaryStockLocation.Amount|number}} {{stck.StockInfo.SecondaryStockLocation.Uom}}
Special return conditions
Product description
Type no.:
LM no.:
Own product no.:
40744
7889600747
-
Discount code:
UNSPSC Code:
Customs code:
80150875
39121800
90329000
PressureTransducer 0-25Pa with 0-10V DC output signal based on micro-flow measurement.
The pressure transducer is equipped with a half/full scale selector. Use the jumper to switch between half scale and full scale. In half scale mode, the output voltage is 10 volt at 50% of the sensors maximum. Example: In half scale mode the pressure transducer has an output of 0V at 0Pa and 10V at 250Pa. If the unit in half scale mode is exposed to a pressure outside the max range, the output voltage may increase to 12V.
The pressure transducer is available for other pressure ranges than the one mentioned above.
NB! The pressure transducer is only to be used in a non condensing environment and in non aggressive air.
| Bredde (mm) | 80 |
|---|---|
| Højde (mm) | 80 |
| Dybde (mm) | 55 |
| Kapslingsklasse (IP) | IP 54 |