![[4059245010042] INDEXING PLUNGER SIZE: 2 D1: M12x1,5 D: 6 Model: C WITH LOCKING SLOT WITHOUT LOCKNUT SS STEEL HARDENED Image #0](https://assets.cdnlemu.dk/product/image/7188771)
![[4059245010042] INDEXING PLUNGER SIZE: 2 D1: M12x1,5 D: 6 Model: C WITH LOCKING SLOT WITHOUT LOCKNUT SS STEEL HARDENED Image #1](https://assets.cdnlemu.dk/product/image/7191852)
![[4059245010042] INDEXING PLUNGER SIZE: 2 D1: M12x1,5 D: 6 Model: C WITH LOCKING SLOT WITHOUT LOCKNUT SS STEEL HARDENED Image #2](https://assets.cdnlemu.dk/product/image/7188770)
[4059245010042] INDEXING PLUNGER SIZE: 2 D1: M12x1,5 D: 6 Model: C WITH LOCKING SLOT WITHOUT LOCKNUT SS STEEL HARDENED
- EAN no.: 4059245010042
- LM no.: 4059245010042
- Supplier: Heinrich Kipp
Must login for adding to cart
Description
Type no: K0632.003206
Promotion code: 30490060
UNSPSC (v. 19.0501): 27112120
HS Code: 73181900
Material: Indexing pin hardened: Threaded sleeve 1.4305. Indexing pin 1.4034. Indexing pin not hardened: Threaded sleeve 1.4305. Indexing pin 1.4305. Mushroom knob 1.4305, electrolytic-polish.
model: . Indexing pin ground.
Note: Indexing plungers are used to prevent any change in locking position due to lateRAL forces. A new locking position can only be set after the pin has been manually disengaged. Model C or D is rECOmmended for applications in which the pin is disengaged over extended periods and should be prevented from springing back.
On request: Special models.
model: . Indexing pin ground.
Note: Indexing plungers are used to prevent any change in locking position due to lateRAL forces. A new locking position can only be set after the pin has been manually disengaged. Model C or D is rECOmmended for applications in which the pin is disengaged over extended periods and should be prevented from springing back.
On request: Special models.