![[4059245013487] INDEXING PLUNGER SIZE: 1 D1: M10X1 D: 5 Model: B WITH LOCKNUT SS STEEL NOT HARDENED Image #0](https://assets.cdnlemu.dk/product/image/7187668)
![[4059245013487] INDEXING PLUNGER SIZE: 1 D1: M10X1 D: 5 Model: B WITH LOCKNUT SS STEEL NOT HARDENED Image #1](https://assets.cdnlemu.dk/product/image/7191937)
![[4059245013487] INDEXING PLUNGER SIZE: 1 D1: M10X1 D: 5 Model: B WITH LOCKNUT SS STEEL NOT HARDENED Image #2](https://assets.cdnlemu.dk/product/image/7187666)
[4059245013487] INDEXING PLUNGER SIZE: 1 D1: M10X1 D: 5 Model: B WITH LOCKNUT SS STEEL NOT HARDENED
- EAN no.: 4059245013487
- LM no.: 4059245013487
- Supplier: Heinrich Kipp
Must login for adding to cart
Description
Type no.: K0339.12105
Promotion code: 30490060
UNSPSC (v. 19.0501): 27112120
HS Code: 73181900
Material: Steel model
Indexing pin hardened:
grade 5.8.
SS steel model
Indexing pin hardened:
Threaded sleeve 1.4305.
Indexing pin 1.4034.
Indexing pin not hardened:
Threaded sleeve 1.4305.
Indexing pin 1.4305.
Mushroom knob black-grey TermoPlast, ic.
model: Steel model: Indexing pin hardened, ground, black Oxideretd. SS steel model: Indexing pin hardened, ground and. Indexing pin not hardened, ground and.
Note: Indexing plungers are used to prevent any change in locking position due to lateRAL forces. A new locking position can only be set after the pin has been manually disengaged. Model C or D is rECOmmended for applications in which the pin is disengaged over extended periods and should be prevented from springing back.
On request: Special models and spacer rings.
Indexing pin hardened:
grade 5.8.
SS steel model
Indexing pin hardened:
Threaded sleeve 1.4305.
Indexing pin 1.4034.
Indexing pin not hardened:
Threaded sleeve 1.4305.
Indexing pin 1.4305.
Mushroom knob black-grey TermoPlast, ic.
model: Steel model: Indexing pin hardened, ground, black Oxideretd. SS steel model: Indexing pin hardened, ground and. Indexing pin not hardened, ground and.
Note: Indexing plungers are used to prevent any change in locking position due to lateRAL forces. A new locking position can only be set after the pin has been manually disengaged. Model C or D is rECOmmended for applications in which the pin is disengaged over extended periods and should be prevented from springing back.
On request: Special models and spacer rings.