![[4059245227051] INDEXING PLUNGER SIZE: 3 D1: M16x1,5 D: 8 Model: A WITHOUT LOCKNUT STEEL HARDENED COMP: TermoPlast IC Image #0](https://assets.cdnlemu.dk/product/image/7187612)
![[4059245227051] INDEXING PLUNGER SIZE: 3 D1: M16x1,5 D: 8 Model: A WITHOUT LOCKNUT STEEL HARDENED COMP: TermoPlast IC Image #1](https://assets.cdnlemu.dk/product/image/7187610)
![[4059245227051] INDEXING PLUNGER SIZE: 3 D1: M16x1,5 D: 8 Model: A WITHOUT LOCKNUT STEEL HARDENED COMP: TermoPlast IC Image #2](https://assets.cdnlemu.dk/product/image/7191902)
[4059245227051] INDEXING PLUNGER SIZE: 3 D1: M16x1,5 D: 8 Model: A WITHOUT LOCKNUT STEEL HARDENED COMP: TermoPlast IC
- EAN no.: 4059245227051
- LM no.: 4059245227051
- Supplier: Heinrich Kipp
Must login for adding to cart
Description
Type no.: K0338.130884
Promotion code: 30490060
UNSPSC (v. 19.0501): 27112120
HS Code: 73181900
Material: Steel model
Indexing pin hardened:
grade 5.8.
SS steel model
Indexing pin hardened:
Threaded sleeve 1.4305
Indexing pin 1.4034
Indexing pin not hardened:
Threaded sleeve 1.4305
Indexing pin 1.4305
Mushroom knob red TermoPlast, ic.
model: Steel model: Indexing pin hardened, ground, black Oxideretd. SS steel model: Indexing pin hardened, ground and. Indexing pin not hardened, ground and.
Note: Indexing plungers are used to prevent any change in locking position due to lateRAL forces. A new locking position can only be set after the pin has been manually disengaged. Model C or D is rECOmmended for applications where the plunger remains disengaged over a long period and the pin should be prevented from springing back.
On request: Special models.
Indexing pin hardened:
grade 5.8.
SS steel model
Indexing pin hardened:
Threaded sleeve 1.4305
Indexing pin 1.4034
Indexing pin not hardened:
Threaded sleeve 1.4305
Indexing pin 1.4305
Mushroom knob red TermoPlast, ic.
model: Steel model: Indexing pin hardened, ground, black Oxideretd. SS steel model: Indexing pin hardened, ground and. Indexing pin not hardened, ground and.
Note: Indexing plungers are used to prevent any change in locking position due to lateRAL forces. A new locking position can only be set after the pin has been manually disengaged. Model C or D is rECOmmended for applications where the plunger remains disengaged over a long period and the pin should be prevented from springing back.
On request: Special models.