ABB AP-Holder for AP9 og AP10
- EAN no.: 6438199038513
- LM no.: 7821402259
- Supplier: ABB
Must login for adding to cart
Description
Type no.: 2TKA00006286
Promotion code: 80080826010
UNSPSC (v. 19.0501): 39121308
HS Code: 85389099
When using ABB's AP9 and AP10 AP-Holder (for WAGO 221-4 (4mm²)), you can perform a faster, easier and safer installation.
The holder ensures secure fastening of the connector blocks in the AP9 and AP10 junction boxes. The holder has imprinted numbering from 1 to 20, which makes marking for documentation work easier and safer.
You mount and remove the connector from the holder without the use of tools. The AP-Holder and the strain relief AS9.10 can be combined in both AP9 and AP10 junction boxes.
ABB AP9 and AP10 AP-Holder AS221.4, for WAGO 221-4 (4mm²):
- Easy and fast installation and many application possibilities
- In the holder, the connector blocks are mounted so that it is still possible to use the test holes in the WAGO’s. This makes it possible to measure without removing the connector block from the holder.
- Secure fixing of WAGO connector blocks in AP9 and AP10 junction boxes
- Numbering on the holder (1-20) for easy identification to the documentation
- The holder can be combined with 221-4 WAGO connector blocks (0.2 - 4mm²) 2-, 3- and 5-conductor versions (can for example contain 6 pcs. WAGO 3x0.2-4mm²)
- The holders is approved in combination with ABB AP9 and AP10 and WAGO 221-4 (4mm²) con-nector blocks
WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbH.
The holder ensures secure fastening of the connector blocks in the AP9 and AP10 junction boxes. The holder has imprinted numbering from 1 to 20, which makes marking for documentation work easier and safer.
You mount and remove the connector from the holder without the use of tools. The AP-Holder and the strain relief AS9.10 can be combined in both AP9 and AP10 junction boxes.
ABB AP9 and AP10 AP-Holder AS221.4, for WAGO 221-4 (4mm²):
- Easy and fast installation and many application possibilities
- In the holder, the connector blocks are mounted so that it is still possible to use the test holes in the WAGO’s. This makes it possible to measure without removing the connector block from the holder.
- Secure fixing of WAGO connector blocks in AP9 and AP10 junction boxes
- Numbering on the holder (1-20) for easy identification to the documentation
- The holder can be combined with 221-4 WAGO connector blocks (0.2 - 4mm²) 2-, 3- and 5-conductor versions (can for example contain 6 pcs. WAGO 3x0.2-4mm²)
- The holders is approved in combination with ABB AP9 and AP10 and WAGO 221-4 (4mm²) con-nector blocks
WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbH.