COMPRESSION LATCH VARIABLE COMP. L: 37 H: 40 STEEL GALVANISED AND PASSIVATED
- EAN no.: 4059245198153
- LM no.: 4059245198153
- Supplier: Heinrich Kipp
Must login for adding to cart
Description
Type no: K0528.4537441
Promotion code: 30490030
UNSPSC (v. 19.0501): 31162420
HS Code: 83014090
Material: Compression latch steel. DIN 6336 star grip thermoset.
Model: Compression latch trivalent blue passivated. Star grip black.
Note: Compression latches are primarily used for doors and housings that require a high pressure on the seal. højre or left deployment. The locking direction is always clockwise.
Assembly: Cut a notch in a Ø25 mm hole for the locking pin. Pass the latch through the hole. The tongue must be in the end position and in the centre of the opening before the nut can be slipped on and tightened.
On request: Water tight model according to IP 65.
Function: Turning the actuator 90° brings the tongue into the closed position. Turning the actuator further winds the tongue up the thread and increases the pressure on the frame. To unlock the latch turn the actuator to the left. The tongue moves to the open position and, even doors with sticky seals can be easily opened. The variable compression gap is 7 mm. The frame width range of 9-44 mm is covered by 7 offset tongues (dimension A). Supplied completely assembled.
Accessories: Key K0535
Drawing reference: 1) locating pin 2) frame Actuation a) square 7 mm b) double lug 3 mm c) double lug 5 mm d) star grip
Model: Compression latch trivalent blue passivated. Star grip black.
Note: Compression latches are primarily used for doors and housings that require a high pressure on the seal. højre or left deployment. The locking direction is always clockwise.
Assembly: Cut a notch in a Ø25 mm hole for the locking pin. Pass the latch through the hole. The tongue must be in the end position and in the centre of the opening before the nut can be slipped on and tightened.
On request: Water tight model according to IP 65.
Function: Turning the actuator 90° brings the tongue into the closed position. Turning the actuator further winds the tongue up the thread and increases the pressure on the frame. To unlock the latch turn the actuator to the left. The tongue moves to the open position and, even doors with sticky seals can be easily opened. The variable compression gap is 7 mm. The frame width range of 9-44 mm is covered by 7 offset tongues (dimension A). Supplied completely assembled.
Accessories: Key K0535
Drawing reference: 1) locating pin 2) frame Actuation a) square 7 mm b) double lug 3 mm c) double lug 5 mm d) star grip