Fischer
Concrete screw Ultracut FBS II 6x35 M8/M10 I
- EAN no.: 4048962329582
- LM no.: 2761406035
Must login for adding to cart
Description
Type no: 546400
Promotion code: 20800265
UNSPSC (v. 19.0501): 31161607
HS Code: 73181499
▪ The first concrete screw with diameter 6 with variable embedment
depth off ers a fl exible adaption of the embedment depth to the loads.
▪ The ETA assessment option 1 includes the use in cracked and non-cracked
concrete for highest safety requirements.
▪ The fi rst 6 mm diameter concrete screw with an ETA assessment for the
C1 seismic performance category for additional safety standards.
▪ Diff erent head designs off er a maximum of fl exibility and a perfect
adaptation to the application.
▪ The ULTRACUT FBS II 6 is approved for multiple use of non-load bearing
systems and thereby ideal for the installation of pipe routes, cable trays
and prestressed hollow concrete ceilings.
FUNCTIONING
▪ The ULTRACUT FBS II is recommended for the push-through / pre-positioned installation.
▪ Drill holes do not need to be cleaned during vertical installation (ceiling
and fl oor). For fl oor fi xings the hole must be drilled 3x drill hole diameter deeper.
▪ The approved adjustment for the concrete screws allows the screw to
be unscrewed twice for a total length of 20 mm, to place maximum 10 mm
packing below the base plates or to align the attached part, and then to
tighten the screw again.
▪ We recommend using a tangential impact screwdriver with a suitable
impact screwdriver socket or an internal torx drive.
▪ The screw is installed correctly when the screw head sits fl ush on the fi xture
(visual setting control).
depth off ers a fl exible adaption of the embedment depth to the loads.
▪ The ETA assessment option 1 includes the use in cracked and non-cracked
concrete for highest safety requirements.
▪ The fi rst 6 mm diameter concrete screw with an ETA assessment for the
C1 seismic performance category for additional safety standards.
▪ Diff erent head designs off er a maximum of fl exibility and a perfect
adaptation to the application.
▪ The ULTRACUT FBS II 6 is approved for multiple use of non-load bearing
systems and thereby ideal for the installation of pipe routes, cable trays
and prestressed hollow concrete ceilings.
FUNCTIONING
▪ The ULTRACUT FBS II is recommended for the push-through / pre-positioned installation.
▪ Drill holes do not need to be cleaned during vertical installation (ceiling
and fl oor). For fl oor fi xings the hole must be drilled 3x drill hole diameter deeper.
▪ The approved adjustment for the concrete screws allows the screw to
be unscrewed twice for a total length of 20 mm, to place maximum 10 mm
packing below the base plates or to align the attached part, and then to
tighten the screw again.
▪ We recommend using a tangential impact screwdriver with a suitable
impact screwdriver socket or an internal torx drive.
▪ The screw is installed correctly when the screw head sits fl ush on the fi xture
(visual setting control).