Console 985x1200x400
- EAN no.: 8713574033856
- LM no.: 7813009990
- Supplier: nVent HOFFMAN
Must login for adding to cart
Description
Type no: MPGS12
Promotion code: 80060678040
UNSPSC (v. 19.0501): 39121300
HS Code: 85381000
Material:
AISI 304 pre-grained stainless steel / AISI 316L (on request). Body and door: 2 mm. Rear panel: 1.5 mm. Bottom plates: 1.5 mm. Mounting plate: 2.5 mm galvanized steel.
Body:
Folded and seam welded. Console construction includes a base that provides a distance between the floor and the lower part of the door/s, acting as an integrated plinth.
Doors and panels:
Single folded surface mounted with hinges, allowing left and right-hand opening to base door. Angle 12° from horizontal. Concealed hinges, on top edge, allow 90° opening. Panel held open by self engage/self release mechanical panel stay. Double door on 1200 wide base units.
Mounting plate:
Standard mounting plate in base unit.
Lock:
Double-bit 3 mm locks for top panel. For base, two double-bit 3 mm locks.
Cable inlet:
Bottom opening for cable access. Bottom plate for cable glanding supplied as standard.
Earthing:
M8 threaded studs on body, door, top panel and rear panel.
Finish:
400 pre-grained stainless steel.
Protection:
Single door: IP 66 | TYPE 4X, 12, 13 | IK 10. Double door: IP 55 | TYPE 12, 13 | IK 10.
Delivery:
Mounting plate and suitable nuts and washers for earthing. The console is delivered on a wooden pallet.
AISI 304 pre-grained stainless steel / AISI 316L (on request). Body and door: 2 mm. Rear panel: 1.5 mm. Bottom plates: 1.5 mm. Mounting plate: 2.5 mm galvanized steel.
Body:
Folded and seam welded. Console construction includes a base that provides a distance between the floor and the lower part of the door/s, acting as an integrated plinth.
Doors and panels:
Single folded surface mounted with hinges, allowing left and right-hand opening to base door. Angle 12° from horizontal. Concealed hinges, on top edge, allow 90° opening. Panel held open by self engage/self release mechanical panel stay. Double door on 1200 wide base units.
Mounting plate:
Standard mounting plate in base unit.
Lock:
Double-bit 3 mm locks for top panel. For base, two double-bit 3 mm locks.
Cable inlet:
Bottom opening for cable access. Bottom plate for cable glanding supplied as standard.
Earthing:
M8 threaded studs on body, door, top panel and rear panel.
Finish:
400 pre-grained stainless steel.
Protection:
Single door: IP 66 | TYPE 4X, 12, 13 | IK 10. Double door: IP 55 | TYPE 12, 13 | IK 10.
Delivery:
Mounting plate and suitable nuts and washers for earthing. The console is delivered on a wooden pallet.