Control and signalling transformer 1 fase primary: 230V secondary: 24V-160VA

These transformers meet the requirements for control contactors, relays, etc. Minimum characteristics are covered by the standard IEC/EN 61558-2-2, with e.g. a maximum voltage drop, indication of the permissible instantaneous power. For the Legrand range, these transformers comply with the "isolation" standards IEC/EN 61558-2-4 for secondaries higher than 50 V or "safety" type. IEC/EN 61558-2-6 for secondaries below 50 V. IP 2X or XXB up to 400 VA - IP XXA above 400 VA - IK 04. In accordance with IEC EN 61558-2-2 and 2-4 or 2-6, UL5085 and CSA C22-2-No 66 UL USA and Canada agreements. Products suitable for building equipment complying with standards EN 61131-2, EN 60204-1 and EN 60439-1 Active parts protected by cover up to 1000 VA. Interference filtering (except cat. no. 0 442 16/17/18) Direct mounting option on symmetrical rail 2 up to 250 VA. Supplied with terminal strip 0 V secondary / earth up to 1000 VA (except spring connection area) Control & Safety transformer. 1 phase - primary side: (± 15V) 230V / secondary side: 24V - 160VA.