Dimmer 1004/P black
- EAN no.: 5711958002125
- LM no.: 7867100832
- Supplier: Teknisk Belysnings Industri
Must login for adding to cart
Description
Type no: ARD038305
Promotion code: 80110020
UNSPSC (v. 19.0501): 39122206
HS Code: 94059190
Universal electronic push button dimmer with power supply signal led. Designed for dimming of incandescent lamps, compact fluorescent and LED dimmable lamps. This model has minimum brightness adjustable and an integrated protection for end-of-life lamps.
- Integrated load failure protection (LFP)
- For flat and round cables
- Memory on last dimming level
- Minimum brightness adjustable
- Integrated led for visibility and mains detection
- With a short pressure the dimmer turns on, with prolonged pressure increases the light output and subsequent long press decreases.
- With next short pressure the lamp switches off.
- At next switch-on increase to the maximum brightness (to facilitate the start of CFL and LEDs lamps) and then automatically reduces the last value selected before the switch-off with button. With switch-on from controlled socket, the dimmer increases to the maximum brightness and then automatically is reduced to the last value selected before the shutdown of the controlled socket.
-In the event of an intervention of protection you have to release supply voltage in order to restore the dimmer function
- NEVER CONNECT DIFFERENT OR HIGHER LOADS THAN THE NOMINAL ONES DECLARED
- Max 4 dimmable lamps with CFL or LED load.
Technical data:
Rated input voltage: 100-240 Vac
Power range: 4-25W LED Ret | 4-100W @ 120V INC | 4-150W @220-240V INC | 11-25W CFL
Type of load: LED Retrofit | CFL | Incandescent-halogen
Dimming: Built-in push button
Frequency: 50-60Hz
Cables section: Flat cable H03VVH2-F or round cable H03VV-F 2x0.75 mm²
Closure: Screw type
Dimension: 96,5 x 30,5 x 28 mm
- Integrated load failure protection (LFP)
- For flat and round cables
- Memory on last dimming level
- Minimum brightness adjustable
- Integrated led for visibility and mains detection
- With a short pressure the dimmer turns on, with prolonged pressure increases the light output and subsequent long press decreases.
- With next short pressure the lamp switches off.
- At next switch-on increase to the maximum brightness (to facilitate the start of CFL and LEDs lamps) and then automatically reduces the last value selected before the switch-off with button. With switch-on from controlled socket, the dimmer increases to the maximum brightness and then automatically is reduced to the last value selected before the shutdown of the controlled socket.
-In the event of an intervention of protection you have to release supply voltage in order to restore the dimmer function
- NEVER CONNECT DIFFERENT OR HIGHER LOADS THAN THE NOMINAL ONES DECLARED
- Max 4 dimmable lamps with CFL or LED load.
Technical data:
Rated input voltage: 100-240 Vac
Power range: 4-25W LED Ret | 4-100W @ 120V INC | 4-150W @220-240V INC | 11-25W CFL
Type of load: LED Retrofit | CFL | Incandescent-halogen
Dimming: Built-in push button
Frequency: 50-60Hz
Cables section: Flat cable H03VVH2-F or round cable H03VV-F 2x0.75 mm²
Closure: Screw type
Dimension: 96,5 x 30,5 x 28 mm