Dry Moly sptray 400ML
- EAN no.: 5024747100255
- LM no.: 3351470030
- Supplier: Itw Chemical Products
Must login for adding to cart
Description
Type no: 47003000
Promotion code: 30620400590
UNSPSC (v. 19.0501): 15121802
HS Code: 27101929
Dry Moly Spray
Dry film coating of molybdenum disulphide in aerosol form
Product Overview
ROCOL® Dry Moly Spray provides a very high content molybdenum disulphide film. It is designed to lubricate sliding mechanisms such as plain bearings, pins, cams and slides where a wet lubricant cannot be tolerated.
Also available in paste form – see Dry Moly Paste, and solvent based liquid form – see Dry Moly Fluid.
Typical Applications
ROCOL Dry Moly Spray is primarily designed as an assembly lubricant for sliding mechanisms, plain bearings and other applications where a totally dry film lubricant is required.
ROCOL Dry Moly Spray can also be used as a dry film chain lubricant where wet films cannot be tolerated.
Features and Benefits
Temperature range -50°C to +450°C.
Dry film lubrication – resists pick-up of contaminants.
Prevents galling, pick-up and seizure.
Resistant to high loads (up to 7,000 kg/cm2).
Excellent wear resistance (high molybdenum disulphide content).
Directions for Storage and Use
Ensure surfaces to be treated are clean, dry and free from oil, grease or dirt contamination.
Shake aerosol thoroughly for 2-3 mins after agitator ball begins to rattle.
Hold upright and apply a thin even coating from approximate distance of 15-30cm (6-12 inches).
Use only in well ventilated areas.
After use invert can and spray until nozzle is clear.
Film will be touch dry in 2-3 mins and completely cured in approximately 3 hours.
The cured film can be improved by lightly burnishing with a lint free cloth.
Also available as Dry Moly Paste for application as paste, and Dry Moly Fluid for dipping, brushing or spraying.
The storage temperature should be kept below +50°C, and the storage area should be out of direct sunlight.
Shelf life is 4 years from date of manufacture.
Specifications
Rolls Royce Specification – R-R OMAT 4/52.
Pack Sizes Pack Size
Dry film coating of molybdenum disulphide in aerosol form
Product Overview
ROCOL® Dry Moly Spray provides a very high content molybdenum disulphide film. It is designed to lubricate sliding mechanisms such as plain bearings, pins, cams and slides where a wet lubricant cannot be tolerated.
Also available in paste form – see Dry Moly Paste, and solvent based liquid form – see Dry Moly Fluid.
Typical Applications
ROCOL Dry Moly Spray is primarily designed as an assembly lubricant for sliding mechanisms, plain bearings and other applications where a totally dry film lubricant is required.
ROCOL Dry Moly Spray can also be used as a dry film chain lubricant where wet films cannot be tolerated.
Features and Benefits
Temperature range -50°C to +450°C.
Dry film lubrication – resists pick-up of contaminants.
Prevents galling, pick-up and seizure.
Resistant to high loads (up to 7,000 kg/cm2).
Excellent wear resistance (high molybdenum disulphide content).
Directions for Storage and Use
Ensure surfaces to be treated are clean, dry and free from oil, grease or dirt contamination.
Shake aerosol thoroughly for 2-3 mins after agitator ball begins to rattle.
Hold upright and apply a thin even coating from approximate distance of 15-30cm (6-12 inches).
Use only in well ventilated areas.
After use invert can and spray until nozzle is clear.
Film will be touch dry in 2-3 mins and completely cured in approximately 3 hours.
The cured film can be improved by lightly burnishing with a lint free cloth.
Also available as Dry Moly Paste for application as paste, and Dry Moly Fluid for dipping, brushing or spraying.
The storage temperature should be kept below +50°C, and the storage area should be out of direct sunlight.
Shelf life is 4 years from date of manufacture.
Specifications
Rolls Royce Specification – R-R OMAT 4/52.
Pack Sizes Pack Size