Energy sensor PowerTag Energy F160 PowerTag Flex 160A 3P/3P+N to mounting in top or bottom position
- EAN no.: 3606481595270
- LM no.: 3398992924
- Supplier: Schneider Electric
Must login for adding to cart
Description
Type no.: A9MEM1580
Promotion code: 80080488220
UNSPSC (v. 19.0501): 41113643
HS Code: 90289010
PowerLogic PowerTag Energy Flex 160 A. With its flex design this PowerTag Energy can be used on many products or group of loads up to 160 A on 3P or 3P+N networks. Its removable spring connector for voltage picking facilitates its installation, and shapes for brackets allows to mount and maintain it where needed in a panel.
PowerTag Energy Flex sensor measures the following values in accordance with the IEC 61557-12 standard (PDM-II/DD/K70/1):
Energy (4 quadrants): Active energy (kWh), Active energy per phase (kWh), Reactive energy (kVARh), Reactive energy per phase (kVARh), Apparent energy (kVAh) and Apparent energy per phase (kVAh)
Power: Active power (W), Reactive power (VAR) and Apparent power (VA)
Voltages (V)
Currents (A)
Frequency
Power factor (PF)
Voltage loss alarm: PowerTag Energy Flex sensor sends a “voltage loss” alarm and the current-per-phase value before being de-energized. At “voltage loss”, PowerTag Energy Flex adds an overload alarm if the current is higher than the rated current of the associated protective device
Note: functions listed above depend on concentrators/gateways.
PowerTag Energy Flex can be installed in a panel directly on cables or busbars, associated to a product or not. Voltage pickings removable spring terminal must be wired by 1 copper wire per phase with following characteristics: Wire range - Solid = 0.2...1.5 mm2, stranded = 0.2...2.5 mm2 and stranded with terminal ends = 0.25...1.5 mm2.
PowerTag Energy Flex is mainly advised for ComPact NSXm, ComPact INS160, Acti9 NG125, Acti9 C120, PowerPact B, TeSys GV4, but also all other devices with a rating between 63 A and 160 A.
PowerTag Energy Flex sensor measures the following values in accordance with the IEC 61557-12 standard (PDM-II/DD/K70/1):
Energy (4 quadrants): Active energy (kWh), Active energy per phase (kWh), Reactive energy (kVARh), Reactive energy per phase (kVARh), Apparent energy (kVAh) and Apparent energy per phase (kVAh)
Power: Active power (W), Reactive power (VAR) and Apparent power (VA)
Voltages (V)
Currents (A)
Frequency
Power factor (PF)
Voltage loss alarm: PowerTag Energy Flex sensor sends a “voltage loss” alarm and the current-per-phase value before being de-energized. At “voltage loss”, PowerTag Energy Flex adds an overload alarm if the current is higher than the rated current of the associated protective device
Note: functions listed above depend on concentrators/gateways.
PowerTag Energy Flex can be installed in a panel directly on cables or busbars, associated to a product or not. Voltage pickings removable spring terminal must be wired by 1 copper wire per phase with following characteristics: Wire range - Solid = 0.2...1.5 mm2, stranded = 0.2...2.5 mm2 and stranded with terminal ends = 0.25...1.5 mm2.
PowerTag Energy Flex is mainly advised for ComPact NSXm, ComPact INS160, Acti9 NG125, Acti9 C120, PowerPact B, TeSys GV4, but also all other devices with a rating between 63 A and 160 A.