Energy sensor PowerTag Energy R200 PowerTag Rope 200A 3P/3P+N to mounting in top or bottom position
- EAN no.: 3606481595287
- LM no.: 3398992937
- Supplier: Schneider Electric
Must login for adding to cart
Description
Type no: A9MEM1590
Promotion code: 80080488220
UNSPSC (v. 19.0501): 41113643
HS Code: 90303370
PowerLogic PowerTag Energy Rope 200 A to 2000 A. With its flexible and openable current sensors, this PowerTag Energy Rope can be installed easily on busbars and cables without having to disconnect the conductors and is suitable for 3P or 3P+N networks. Its removable spring connector for voltage picking facilitates its installation, and the module can be mounted on a DIN rail or maintained with brackets where needed in a panel.
PowerTag Energy Rope sensor measures the following values in accordance with
the IEC 61557-12 standard (PDM-II/DD/K70/1):
Energy (4 quadrants): Active energy (kWh), Active energy per phase (kWh), Reactive energy (kVARh), Reactive energy per phase (kVARh), Apparent energy (kVAh) and Apparent energy per phase (kVAh)
Power: Active power (W), Reactive power (VAR) and Apparent power (VA)
Voltages (V)
Currents (A)
Frequency
Power factor
Voltage loss alarm: PowerTag Energy Flex sensor sends a “voltage loss” alarm and the current-per-phase value before being de-energized. At “voltage loss”, PowerTag Energy Flex adds an overload alarm if the current is higher than the rated current of the associated protective device
Note: functions listed above depend on concentrators/gateways.
PowerTag Energy Rope 18 mm module can be mounted on DIN rail or fastened with brackets anywhere in a panel. Then its openable current sensors must be installed around conductors, cables or busbars, whatever they are insulated or not. Voltage pickings removable spring terminal must be wired by 1 copper wire per phase with following characteristics: Wire range - Solid = 0.2...1.5 mm2, stranded = 0.2...2.5 mm2 and stranded with terminal ends = 0.25...1.5 mm2.
PowerTag Energy Rope is mainly advised for ComPact NS, MasterPact NT and NW, MasterPact MTZ, for retrofit, for group of loads, but also for all other devices with a rating up to 2000 A.
PowerTag Energy Rope sensor measures the following values in accordance with
the IEC 61557-12 standard (PDM-II/DD/K70/1):
Energy (4 quadrants): Active energy (kWh), Active energy per phase (kWh), Reactive energy (kVARh), Reactive energy per phase (kVARh), Apparent energy (kVAh) and Apparent energy per phase (kVAh)
Power: Active power (W), Reactive power (VAR) and Apparent power (VA)
Voltages (V)
Currents (A)
Frequency
Power factor
Voltage loss alarm: PowerTag Energy Flex sensor sends a “voltage loss” alarm and the current-per-phase value before being de-energized. At “voltage loss”, PowerTag Energy Flex adds an overload alarm if the current is higher than the rated current of the associated protective device
Note: functions listed above depend on concentrators/gateways.
PowerTag Energy Rope 18 mm module can be mounted on DIN rail or fastened with brackets anywhere in a panel. Then its openable current sensors must be installed around conductors, cables or busbars, whatever they are insulated or not. Voltage pickings removable spring terminal must be wired by 1 copper wire per phase with following characteristics: Wire range - Solid = 0.2...1.5 mm2, stranded = 0.2...2.5 mm2 and stranded with terminal ends = 0.25...1.5 mm2.
PowerTag Energy Rope is mainly advised for ComPact NS, MasterPact NT and NW, MasterPact MTZ, for retrofit, for group of loads, but also for all other devices with a rating up to 2000 A.