eXLhoist Compact transmitter with 8 buttons + emergency stop and with adaptor for 3xAAA batteries

Harmony eXLhoist Compact is a simple wireless radio controller for crane applications. The system consists of a battery powered transmitter and a receiver with 10 relay outputs. There are 6 buttons on the transmitter for activating the 3 axis (hoist, bridge and trolley). There is a stop on the side of the handle approved for PLd, Cat 3 safety level. Harmony eXLhoist Compact has an IP65 rating and be used in environments from -20..50 degrees Celcius. ZART8LS is a transmitter with 8 x 2 steps buttons on the front where 6 of them are used for controlling the 3 axis on the crane. The transmitter is delivered with a battery adaptor with 3 x AAA batteries capable of up to 100 hours of operation. Between the transmitter and the receiver the communication is a 2,4 GHz simplex radio protocol Maximum operating distance is up to 100 meters. It is possible to replace the battery adaptor to a rechargeable Li-Ion battery, capable of up to 150 hours of operation on one single charge. The transmitter is included with the rubber protection cover for extra mechanical protection. The ZART8LS transmitter is easily pair with the ZARB10WS/ZARB10WSP receiver by the buttons on the front of the transmitter and the 2 programming buttons on the base of the receiver. It is possible to read the status of the transmitter on the 5 LED's on the top of the front panel.