F3 8820-P-S F3 is built with aluminum profiles and steel
- EAN no.: 7330701104473
- LM no.: 7886991828
- Supplier: Enoc System
Must login for adding to cart
Description
Type no: 57547
Promotion code: 80120164015
UNSPSC (v. 19.0501): 24102001
HS Code: 94032080
F3 is built with aluminum profiles and steel.
Screw assembled frame with aluminum profiles, steel sheet profiles and die-cast zinc corners. The frame has two integrated vertical screw pockets in each corner profile.
The 19" profiles can be steplessly repositioned through the depth of the enclosure. The depth profiles have markings for precise positioning of the 19" profiles. The 19" profiles are numbered in height units.
F3 contains one pair of 19" profiles (600 and 800 mm deep) or two pairs of 19" profiles (1000 mm deep). One pair is preinstalled at a depth of 100 mm from the front of the enclosure and the other pair is pre-installed 740 mm further in.
M10 thread in each corner both in the bottom and top for accessory fixing.
1 central earthing point M5 in corner upright.
FRONT DOOR
Front door of ventilated metal door, made of sheet steel glued into an aluminum profiles left and right.
LS 19 locking wing with C101 safety cylinder. LS 85 can be installed as accessory. Integrated quick lock system allows door to be removed without use of tools.
Door opening angle >180 degrees in single enclosure configuration. Right hinged, can be rehung to be left hinged.
BACK DOOR
Back door is made of 1 mm sheet steel.
LS 39 lock with C101 safety cylinder. LS 85 can be installed as accessory. Integrated quick lock system allows door to be removed without use of tools.
Door opening angle >180 degrees in single enclosure configuration. Right hinged, can be re-hung to be left hinged.
SIDE PANELS
Sheet steel side panels, easy to detach and one lock lockable from inside and one slotted lock.
LS 29 with C101 safety cylinder available as accessory.
ROOF
Roof with cutout cable entrance in rear, left and right. One cutout to fit FPME or VPE accessory.
Brush list available as accessory.
Screw assembled frame with aluminum profiles, steel sheet profiles and die-cast zinc corners. The frame has two integrated vertical screw pockets in each corner profile.
The 19" profiles can be steplessly repositioned through the depth of the enclosure. The depth profiles have markings for precise positioning of the 19" profiles. The 19" profiles are numbered in height units.
F3 contains one pair of 19" profiles (600 and 800 mm deep) or two pairs of 19" profiles (1000 mm deep). One pair is preinstalled at a depth of 100 mm from the front of the enclosure and the other pair is pre-installed 740 mm further in.
M10 thread in each corner both in the bottom and top for accessory fixing.
1 central earthing point M5 in corner upright.
FRONT DOOR
Front door of ventilated metal door, made of sheet steel glued into an aluminum profiles left and right.
LS 19 locking wing with C101 safety cylinder. LS 85 can be installed as accessory. Integrated quick lock system allows door to be removed without use of tools.
Door opening angle >180 degrees in single enclosure configuration. Right hinged, can be rehung to be left hinged.
BACK DOOR
Back door is made of 1 mm sheet steel.
LS 39 lock with C101 safety cylinder. LS 85 can be installed as accessory. Integrated quick lock system allows door to be removed without use of tools.
Door opening angle >180 degrees in single enclosure configuration. Right hinged, can be re-hung to be left hinged.
SIDE PANELS
Sheet steel side panels, easy to detach and one lock lockable from inside and one slotted lock.
LS 29 with C101 safety cylinder available as accessory.
ROOF
Roof with cutout cable entrance in rear, left and right. One cutout to fit FPME or VPE accessory.
Brush list available as accessory.