Floor enclosure F1 61220

F1 Black Thanks to Enoc System’s stepless assembly system, you can put your equipment exactly where you want it in the F1. With the option of off-centre positioning, you can create plenty of space where you need it. A large space on both sides, or an extra large space on one side. F1 is built with aluminium profiles and supports up to 1,500 kilos. The enclosure is assembled with nothing but screws, making it easy to assemble, dismantle and reassemble. The F1 can be adapted as your business grows and changes. Enoc IT enclosures look so good that they are as suitable in an office as in a server room. The F1 is definitely no exception. Its rounded corners give it a sleek look. Concealed screws, aluminium profiles and an integrated door contribute to a streamlined appearance. •F1 enclosures are available in heights of 20, 24, 29, 33, 38, 42 and 47 HU in combination with widths of 600 and 800 mm and depths of 600, 800, 1,000 and 1,200 mm. • Screw-assembled frame with aluminium profiles and die-cast zinc corners. The frame has two integrated vertical screw pockets in each corner profile for universal mounting of accessories. • Frame can be dismantled by means of screws. • Finish: Black RAL9005. • Ingress protection class IP20. • Maximum static load 1,500 kg. • Front door is made of 4 mm smoke-coloured safety glass built into an aluminium frame. LS 85 ergonomic locking handle with C101 safety cylinder. Can be adapted for other lock systems. Integrated quick lock system allows door to be removed without use of tools. Door opening angle >180˚ in single enclosure configuration. Right-hinged, can be re-hung to be left-hinged. • Rear door made of 1 mm sheet steel built into an aluminium frame. LS 37 lock with C101 safety cylinder. Integrated quick lock system allows door to be removed without use of tools. Door opening angle >180˚ in single enclosure configuration. Right-hinged, can be re-hung to be left-hinged. • Sheet steel side panels, easy to detach and lockable from inside. Integrated handle for easier handling. • The top consists of replaceable modular panels. One panel has cable glands with brush strip on the back and the rest are cover plates. Can be replaced with ventilation panels, fan packages or panels with integrated cable glands. All modules can be rotated 90˚ and assembled with the cable glands on the left and/or right side. The U-shaped panel with integrated cable glands makes it easy to move pre-existing installations into the enclosure. • The base is open, but can be fitted with cover plate/base plate packages. • The 19-inch profiles can be steplessly repositioned through the depth of the enclosure. The depth profiles have markings for precise positioning of the 19-inch profiles. The 19-inch profiles are numbered in height units. The whole 19-inch assembly can be moved right or left to an off-centre position. Enclosures with a depth of ≤800 mm have one pair of 19-inch profiles pre-installed at a depth of 100 mm from the front of the enclosure. Enclosures with a depth of ≥1,000 mm have two pairs of 19-inch profiles. One pair is pre-installed at a depth of 100 mm from the front of the enclosure and the other pair is pre-installed 740 mm further in. • 1 central earthing point M5 in corner upright.