Fluke 719-30G trykkalibrator elektr
- EAN no.: 0095969465366
- LM no.: 7898100652
- Supplier: FLUKE DANMARK A/S
Must login for adding to cart
Description
Type no: 3315332
Promotion code: 80160869054
UNSPSC (v. 19.0501): 41112405
HS Code: 90262020
Forget the Hassle of Hand Pumping
Now you can calibrate and test pressure devices quickly and easily with one hand, saving valuable time. With the innovative, built-in electric pump, the Fluke 719 Electric Pressure Calibrator provides pressure calibration at your fingertips!
General Specifications
Storage temperature -30°C to 60°C
Operating temperature -10°C to 55°C
Relative humidity 95% (-10°C to 30°C)
75% (30°C to 40°C)
45% (40°C to 50°C)
35% (50°C to 55°C)
Shock 1 meter drop test
Safety CSA C22.2 No. 1010.1:1992
EMC EN50082-1:1992 and EN55022:1994 Class B
Size (H x W x L) 60 x 87 x 210 mm
(2.19 x 3.41 x 8.28 in)
Weight 912 g (2 lb)
Battery Two 9 V alkaline batteries
Battery life 12 hours with 12 mA into 500 Ω, 200 pump cycles to 100 psi, 500 pump cycles to 30 psi
Warranty Three-years, one year for pump
Specifications
Fluke-719 30G Range -12 to 36 psi, -850 mbar to 2.4 bar
Resolution 0.001 psi, 0.1 mbar
Accuracy 0.025% range for 6 months
0.035% of range for one (1) year
mA Range 0 to 24 mA
Resolution 0.001 mA
Accuracy .015% Rdg + 2 counts
Max load, 1000 Ω, 750 Ω ohm in HART mode
Loop supply Range 24 V DC
Resolution N/A
Accuracy ±10%
Pump Specifications
Maximum pressure generation 120 psi (8 BAR) (100 psi model)
Pump to -30 psi in less than 15 seconds1
-100 psi in less than 45 seconds1
1. With 1 meter of 1/8 inch test hose
Pump cycles between rebuilds 5000
Total pump life 20,000 calibration cycle
Use the programmable pump limit settings to eliminate over-pressurization, and to set ‘pump to’ pressure values. The unique cleanout port design reduces pump failures, and makes the 719 easy to clean without repair. The compact, lightweight form, combined with one-handed calibration, makes this pressure calibrator the ideal tool for busy process professionals.
Pressure calibration made easy, by a name you know and trust for all your process calibration needs
Now you can calibrate and test pressure devices quickly and easily with one hand, saving valuable time. With the innovative, built-in electric pump, the Fluke 719 Electric Pressure Calibrator provides pressure calibration at your fingertips!
General Specifications
Storage temperature -30°C to 60°C
Operating temperature -10°C to 55°C
Relative humidity 95% (-10°C to 30°C)
75% (30°C to 40°C)
45% (40°C to 50°C)
35% (50°C to 55°C)
Shock 1 meter drop test
Safety CSA C22.2 No. 1010.1:1992
EMC EN50082-1:1992 and EN55022:1994 Class B
Size (H x W x L) 60 x 87 x 210 mm
(2.19 x 3.41 x 8.28 in)
Weight 912 g (2 lb)
Battery Two 9 V alkaline batteries
Battery life 12 hours with 12 mA into 500 Ω, 200 pump cycles to 100 psi, 500 pump cycles to 30 psi
Warranty Three-years, one year for pump
Specifications
Fluke-719 30G Range -12 to 36 psi, -850 mbar to 2.4 bar
Resolution 0.001 psi, 0.1 mbar
Accuracy 0.025% range for 6 months
0.035% of range for one (1) year
mA Range 0 to 24 mA
Resolution 0.001 mA
Accuracy .015% Rdg + 2 counts
Max load, 1000 Ω, 750 Ω ohm in HART mode
Loop supply Range 24 V DC
Resolution N/A
Accuracy ±10%
Pump Specifications
Maximum pressure generation 120 psi (8 BAR) (100 psi model)
Pump to -30 psi in less than 15 seconds1
-100 psi in less than 45 seconds1
1. With 1 meter of 1/8 inch test hose
Pump cycles between rebuilds 5000
Total pump life 20,000 calibration cycle
Use the programmable pump limit settings to eliminate over-pressurization, and to set ‘pump to’ pressure values. The unique cleanout port design reduces pump failures, and makes the 719 easy to clean without repair. The compact, lightweight form, combined with one-handed calibration, makes this pressure calibrator the ideal tool for busy process professionals.
Pressure calibration made easy, by a name you know and trust for all your process calibration needs