Gira Presence detector Komfort for KNX
- EAN no.: 5710147429576
- LM no.: 7826110766
- Supplier: LUXTEK ApS
Must login for adding to cart
Description
Type no: 210602
Promotion code: 80210200020
UNSPSC (v. 19.0501): 39121107
HS Code: 85423190
Flush-mounted device with integrated KNX bus coupler.
Programming LED/button is visible and can be operated following removal of the ornamental ring once installed.
PIR sensors: three sensors (crossed beam paths), integrated brightness sensor.
Adjuster for manual correction of sensitivity.
Sensitivity is configurable.
Sensitivity adjuster on the device can be deactivated using the software.
Indication of motion detection (permanent or only during walking test).
Separate evaluation in the long range of the three PIR sensors with 120 ranges of detection each with overlapping.
Manual actuation using IR remote control.
A maximum of 5+2 function blocks are configurable.
Functions that can be set for each function block 1 to 5: ceiling observer, presence detector, signal mode.
Function block 6: presence detector with light control.
Function block 7: brightness sensor with limit value monitoring.
Function block switchover, e.g. for day/night mode or week/weekend mode.
Function blocks 1 to 5: individual device, main unit, auxiliary unit can be set.
Operating modes which can be set for individual device as a main unit: automatic, semi-automatic (manual ON / automatic OFF, or automatic ON / manual OFF).
Two outputs per function block (1 to 5) for function ceiling observer, presence detector.
Functions of ceiling observer, presence detector per output: Switching, staircase light function, switching with forced setting, dimming value transmitter, light scene auxiliary unit, temperature value transmitter, brightness value transmitter, temperature operating mode.
Ceiling observer, presence detector: Dusk stage can be set via external communication object or per teach-in, additional transmission delay via external communication object, adaptive delay time (self-teaching additional transmission delay), short-term presence function, feedback of dusk stage, block function, manual operation using push button sensor (separate communication object), switch-off brightness (for presence detectors) via teach-in, measurement of time period after last motion.
Function of presence detector with light control: combination with function block of presence detector or individual device, setpoint value can be set, setpoint value specified via external communication object, setpoint offset via external communication object, teach-in function, feedback of the effective setpoint value.
Function of brightness sensor with limit value monitoring: up to three limit values are configurable, functions of switching, dimming value transmitter, light scene auxiliary unit, configurable hysteresis, limit value via external communication object or teach-in, block function.
Programming LED/button is visible and can be operated following removal of the ornamental ring once installed.
PIR sensors: three sensors (crossed beam paths), integrated brightness sensor.
Adjuster for manual correction of sensitivity.
Sensitivity is configurable.
Sensitivity adjuster on the device can be deactivated using the software.
Indication of motion detection (permanent or only during walking test).
Separate evaluation in the long range of the three PIR sensors with 120 ranges of detection each with overlapping.
Manual actuation using IR remote control.
A maximum of 5+2 function blocks are configurable.
Functions that can be set for each function block 1 to 5: ceiling observer, presence detector, signal mode.
Function block 6: presence detector with light control.
Function block 7: brightness sensor with limit value monitoring.
Function block switchover, e.g. for day/night mode or week/weekend mode.
Function blocks 1 to 5: individual device, main unit, auxiliary unit can be set.
Operating modes which can be set for individual device as a main unit: automatic, semi-automatic (manual ON / automatic OFF, or automatic ON / manual OFF).
Two outputs per function block (1 to 5) for function ceiling observer, presence detector.
Functions of ceiling observer, presence detector per output: Switching, staircase light function, switching with forced setting, dimming value transmitter, light scene auxiliary unit, temperature value transmitter, brightness value transmitter, temperature operating mode.
Ceiling observer, presence detector: Dusk stage can be set via external communication object or per teach-in, additional transmission delay via external communication object, adaptive delay time (self-teaching additional transmission delay), short-term presence function, feedback of dusk stage, block function, manual operation using push button sensor (separate communication object), switch-off brightness (for presence detectors) via teach-in, measurement of time period after last motion.
Function of presence detector with light control: combination with function block of presence detector or individual device, setpoint value can be set, setpoint value specified via external communication object, setpoint offset via external communication object, teach-in function, feedback of the effective setpoint value.
Function of brightness sensor with limit value monitoring: up to three limit values are configurable, functions of switching, dimming value transmitter, light scene auxiliary unit, configurable hysteresis, limit value via external communication object or teach-in, block function.