Gira Presence detector Standard for KNX

Flush-mounted device with integrated KNX bus coupler.
Programming LED/button is visible and can be operated following removal of the ornamental ring once installed.
PIR sensors: three sensors (crossed beam paths), integrated brightness sensor.
Adjuster for manual correction of sensitivity.
Sensitivity is configurable.
Sensitivity adjuster on the device can be deactivated using the software.
Indication of motion detection (permanent or only during walking test).
One function block can be configured.
Indication of motion detection (permanent or only during walking test).
Adjustable operating mode: ceiling observer, presence detector, alarm device.
individual device, main unit, auxiliary unit can be set.
Operating mode for individual device or main unit: automatic, semi-automatic (manual ON / automatic OFF, or automatic ON / manual OFF).
Two outputs (for function: ceiling observer, presence detector).
Output (for function: ceiling observer, presence detector): Switching, staircase light function, switching with forced setting, dimming value transmitter, light scene auxiliary unit, temperature value transmitter, brightness value transmitter, temperature operating mode.
Dusk stage can be set using external communication object or teach-in.
Additional transmission delay via external communication object.
Adaptive delay time (self-teaching additional transmission delay)
Short-term presence function.
Feedback of dusk stage.
Block function.
Manual actuation by pushbutton sensor (separate communication object).
Switch-off brightness (for presence detectors) via teach-in.
Measurement of time period after last motion.