Grundfos DP10.65.26.2.50B
- EAN no.: 5700396853895
- LM no.: 391291153
- Supplier: Grundfos
Must login for adding to cart
Description
Type no: 96106542
Promotion code: 1123030420162
UNSPSC (v. 19.0501): 40151517
HS Code: 84137030
DP10.65.26.2.50B
GRUNDFOS DP pump is a portable pump for both domestic and industrial applications.
The pump has a multi-vane, semi-open impeller for 10 mm free passage and is suitable for pumping
• drainage and surface water
• groundwater
• industrial process water without solids and fibres.
The compact design makes the pump suitable for both temporary and permanent installation.
The pump is a cast iron submersible pump with integrated submersible 3-phase motor. Approvals: LGA
The pump has an intermediate oil chamber pre-filled with non-toxic special oil.
The pump is fitted with a cable plug for easy dismantling. This plug is hermetically sealed with polyurethane to prevent water from penetrating through the cable into the motor.
A clamp between pump housing and motor ensures easy and safe dismantling and assembly. Inspection can be done in the field without any special tools.
The pump is fitted with a double shaft seal in the unique cartridge design. This makes it easy to replace the shaft seal very quickly in the field without any special tools. It also eliminates the risk of faulty installation.
The motor is insulation class F and has long-life, deep-groove, greased-for-life ball bearings.
The pump has DN 65 discharge port and is ready for installation either free-standing or on an auto-coupling system.
Controls:
Moisture sensor: without moisture sensors
Water-in-oil sensor: without water-in-oil sensor
Liquid:
Liquid temperature range: 0 .. 40 °C
Technical:
Type of impeller: SEMI OPEN
Maximum particle size: 10 mm
Primary shaft seal: SIC/SIC
Secondary shaft seal: CARBON/CERAMIC
Max. hydraulic efficiency: 63 %
Approvals on nameplate: LGA
Curve tolerance: ISO 9906:1999 Annex A
Materials:
Pump housing: Cast iron
Pump housing: EN-GJL-250
Impeller: Cast iron
Impeller: EN-GJS500-7
Installation:
Maximum ambient temperature: 40 °C
Maximum operating pressure: 6 bar
Flange standard: DIN
Pump outlet: DN 65
Pressure stage: PN 10
Maximum installation depth: 10 m
Electrical data:
Number of poles: 2
Power input - P1: 3.5 kW
Rated power - P2: 2.6 kW
Rated voltage: 3 x 400-415 V
Voltage tolerance: +6/-10 %
Start. method: direct-on-line
Max starts per. hour: 30
Rated current: 5.8 A
Rated current at 3/4 load: 4.5 A
Rated current at 1/2 load: 3.5 A
Starting current: 33 A
Rated current at no load: 2.8 A
Cos phi - power factor: 0,87
Cos phi - p.f. at 3/4 load: 0,81
Cos phi - p.f. at 1/2 load: 0,68
Rated speed: 2870 rpm
Locked-rotor torque: 19 Nm
Breakdown torque: 24 Nm
Moment of inertia: 0.007 kg m²
Motor efficiency at full load: 74 %
Motor efficiency at 3/4 load: 75 %
Motor efficiency at 1/2 load: 74 %
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Explosion proof: no
Length of cable: 10 m
Cable type: H07RN-F
Type of cable plug: NO PLUG
Others:
Net weight: 61 kg
GRUNDFOS DP pump is a portable pump for both domestic and industrial applications.
The pump has a multi-vane, semi-open impeller for 10 mm free passage and is suitable for pumping
• drainage and surface water
• groundwater
• industrial process water without solids and fibres.
The compact design makes the pump suitable for both temporary and permanent installation.
The pump is a cast iron submersible pump with integrated submersible 3-phase motor. Approvals: LGA
The pump has an intermediate oil chamber pre-filled with non-toxic special oil.
The pump is fitted with a cable plug for easy dismantling. This plug is hermetically sealed with polyurethane to prevent water from penetrating through the cable into the motor.
A clamp between pump housing and motor ensures easy and safe dismantling and assembly. Inspection can be done in the field without any special tools.
The pump is fitted with a double shaft seal in the unique cartridge design. This makes it easy to replace the shaft seal very quickly in the field without any special tools. It also eliminates the risk of faulty installation.
The motor is insulation class F and has long-life, deep-groove, greased-for-life ball bearings.
The pump has DN 65 discharge port and is ready for installation either free-standing or on an auto-coupling system.
Controls:
Moisture sensor: without moisture sensors
Water-in-oil sensor: without water-in-oil sensor
Liquid:
Liquid temperature range: 0 .. 40 °C
Technical:
Type of impeller: SEMI OPEN
Maximum particle size: 10 mm
Primary shaft seal: SIC/SIC
Secondary shaft seal: CARBON/CERAMIC
Max. hydraulic efficiency: 63 %
Approvals on nameplate: LGA
Curve tolerance: ISO 9906:1999 Annex A
Materials:
Pump housing: Cast iron
Pump housing: EN-GJL-250
Impeller: Cast iron
Impeller: EN-GJS500-7
Installation:
Maximum ambient temperature: 40 °C
Maximum operating pressure: 6 bar
Flange standard: DIN
Pump outlet: DN 65
Pressure stage: PN 10
Maximum installation depth: 10 m
Electrical data:
Number of poles: 2
Power input - P1: 3.5 kW
Rated power - P2: 2.6 kW
Rated voltage: 3 x 400-415 V
Voltage tolerance: +6/-10 %
Start. method: direct-on-line
Max starts per. hour: 30
Rated current: 5.8 A
Rated current at 3/4 load: 4.5 A
Rated current at 1/2 load: 3.5 A
Starting current: 33 A
Rated current at no load: 2.8 A
Cos phi - power factor: 0,87
Cos phi - p.f. at 3/4 load: 0,81
Cos phi - p.f. at 1/2 load: 0,68
Rated speed: 2870 rpm
Locked-rotor torque: 19 Nm
Breakdown torque: 24 Nm
Moment of inertia: 0.007 kg m²
Motor efficiency at full load: 74 %
Motor efficiency at 3/4 load: 75 %
Motor efficiency at 1/2 load: 74 %
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Explosion proof: no
Length of cable: 10 m
Cable type: H07RN-F
Type of cable plug: NO PLUG
Others:
Net weight: 61 kg