Grundfos SP3A- 9 0.55kW 380-415V 50Hz
- EAN no.: 5708601051371
- LM no.: 388313090
- Supplier: Grundfos
Must login for adding to cart
Description
Type no: 10001K09
Promotion code: 1123030420141
UNSPSC (v. 19.0501): 40151513
HS Code: 84137030
SP3A-9
Multi-stage submersible pump for raw water supply, groundwater lowering and pressure boosting. The pump is suitable for pumping clean, thin, non-agressive liquids without solid particles or fibres.
The pump is made entirely of Stainless steel DIN W.-Nr. DIN W.-Nr. 1.4301.
The motor is a 3-phase motor with sand shield, liquid-lubricated bearings and pressure equalizing diaphragm.
Liquid:
Max liquid t at 0.15 m/sec: 40 °C
Technical:
Speed for pump data: 2900 rpm
Rated flow: 3 m³/h
Rated head: 40 m
Shaft seal for motor: LIPSEAL
Curve tolerance: ISO 9906:2012 Grade 3B
Materials:
Pump: Stainless steel
Pump: DIN W.-Nr. 1.4301
Pump: AISI 304
Impeller: Stainless steel
Impeller: DIN W.-Nr. 1.4301
Impeller: AISI 304
Motor: Stainless steel
Motor: DIN W.-Nr. 1.4301
Motor: AISI 304
Installation:
Pump outlet: Rp 1 1/4
Motor diameter: 4 inch
Electrical data:
Motor type: MS402
Rated power - P2: 0.55 kW
Rated voltage: 3 x 380-400-415 V
Start. method: direct-on-line
Rated current: 2,00-2,20-2,35 A
Cos phi - power factor: 0,70-0,64-0,60
Rated speed: 2850-2860-2870 rpm
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): B
Built-in temp. transmitter: no
Others:
Minimum efficiency index, MEI =: 0.70
Net weight: 10 kg
Gross weight: 11.3 kg
Shipping volume: 0.008 m3
Multi-stage submersible pump for raw water supply, groundwater lowering and pressure boosting. The pump is suitable for pumping clean, thin, non-agressive liquids without solid particles or fibres.
The pump is made entirely of Stainless steel DIN W.-Nr. DIN W.-Nr. 1.4301.
The motor is a 3-phase motor with sand shield, liquid-lubricated bearings and pressure equalizing diaphragm.
Liquid:
Max liquid t at 0.15 m/sec: 40 °C
Technical:
Speed for pump data: 2900 rpm
Rated flow: 3 m³/h
Rated head: 40 m
Shaft seal for motor: LIPSEAL
Curve tolerance: ISO 9906:2012 Grade 3B
Materials:
Pump: Stainless steel
Pump: DIN W.-Nr. 1.4301
Pump: AISI 304
Impeller: Stainless steel
Impeller: DIN W.-Nr. 1.4301
Impeller: AISI 304
Motor: Stainless steel
Motor: DIN W.-Nr. 1.4301
Motor: AISI 304
Installation:
Pump outlet: Rp 1 1/4
Motor diameter: 4 inch
Electrical data:
Motor type: MS402
Rated power - P2: 0.55 kW
Rated voltage: 3 x 380-400-415 V
Start. method: direct-on-line
Rated current: 2,00-2,20-2,35 A
Cos phi - power factor: 0,70-0,64-0,60
Rated speed: 2850-2860-2870 rpm
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): B
Built-in temp. transmitter: no
Others:
Minimum efficiency index, MEI =: 0.70
Net weight: 10 kg
Gross weight: 11.3 kg
Shipping volume: 0.008 m3