Grundfos UNILIFT AP 12.40.06 A1 1X230V 10M SCH
- EAN no.: 5700390901264
- LM no.: 391313311
Must login for adding to cart
Description
Type no: 96010979
Promotion code: 1023030420161
UNSPSC (v. 19.0501): 40151517
HS Code: 84137021
Unilift AP12.40.06.A1
Submersible drainage pump type
Vertical single-stage stainless steel submersible
pump with vertical discharge port and integrated
submersible 1-phase totally enclosed motor
in insulation class F with thermal overload
protection.
The pump is fitted with suction strainer and
level switch for automatic start and stop.
The impeller is a SEMI OPEN impeller for
12 mm free passage suitable for pumping
groundwater, surface water, rain water and
similar.
The pump has a double shaft seal and an
intermediate oil chamber pre-filled with non-toxic
special oil.
The pump has a riser pipe, a cooling jacket for
continuous cooling of the motor by the pumped
liquid and long-life deep-groove greased-for-life
ball bearings.
The pump is ready for use as it is fitted with
carrying handle and is supplied with a
10 m mains cable. The mains cable is of
the plug type with glass sealing compound in the
socket to prevent penetration of humidity into
the stator windings.
Liquid:
Liquid temperature range: 0 .. 55 °C
Technical:
Type of impeller: SEMI OPEN
Maximum particle size: 12 mm
Materials:
Pump housing: Stainless steel
Pump housing: DIN W.-Nr. 1.4301
Pump housing: AISI 304
Impeller: Stainless steel
Impeller: DIN W.-Nr. 1.4301
Impeller: AISI 304
Installation:
Pump outlet: Rp 1 1/2
Maximum installation depth: 10 m
Electrical data:
Type of motor: PSC
Power input - P1: 0.9 kW
Rated voltage: 1 x 230 V
Rated current: 4.4 A
Cos phi - power factor: 0,99
Rated speed: 2785 rpm
Capacitor size - run: 16 µF/400 V
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Length of cable: 10 m
Type of cable plug: Schuko
Others:
Net weight: 12 kg
Gross weight: 12.5 kg
Submersible drainage pump type
Vertical single-stage stainless steel submersible
pump with vertical discharge port and integrated
submersible 1-phase totally enclosed motor
in insulation class F with thermal overload
protection.
The pump is fitted with suction strainer and
level switch for automatic start and stop.
The impeller is a SEMI OPEN impeller for
12 mm free passage suitable for pumping
groundwater, surface water, rain water and
similar.
The pump has a double shaft seal and an
intermediate oil chamber pre-filled with non-toxic
special oil.
The pump has a riser pipe, a cooling jacket for
continuous cooling of the motor by the pumped
liquid and long-life deep-groove greased-for-life
ball bearings.
The pump is ready for use as it is fitted with
carrying handle and is supplied with a
10 m mains cable. The mains cable is of
the plug type with glass sealing compound in the
socket to prevent penetration of humidity into
the stator windings.
Liquid:
Liquid temperature range: 0 .. 55 °C
Technical:
Type of impeller: SEMI OPEN
Maximum particle size: 12 mm
Materials:
Pump housing: Stainless steel
Pump housing: DIN W.-Nr. 1.4301
Pump housing: AISI 304
Impeller: Stainless steel
Impeller: DIN W.-Nr. 1.4301
Impeller: AISI 304
Installation:
Pump outlet: Rp 1 1/2
Maximum installation depth: 10 m
Electrical data:
Type of motor: PSC
Power input - P1: 0.9 kW
Rated voltage: 1 x 230 V
Rated current: 4.4 A
Cos phi - power factor: 0,99
Rated speed: 2785 rpm
Capacitor size - run: 16 µF/400 V
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Length of cable: 10 m
Type of cable plug: Schuko
Others:
Net weight: 12 kg
Gross weight: 12.5 kg