Grundfos UNILIFT AP 12.40.06.1 1x230V 10m SCH

Unilift AP12.40.06.1

Submersible drainage pump type



Vertical single-stage stainless steel submersible

pump with vertical discharge port and integrated

submersible 1-phase totally enclosed motor

in insulation class F with thermal overload

protection. The pump is fitted with a suction

strainer.



The impeller is a SEMI OPEN impeller for

12 mm free passage suitable for pumping

groundwater, surface water, rain water and

similar.



The pump has a double shaft seal

and an intermediate oil chamber pre-filled with

non-toxic special oil.



The pump has a riser pipe, a cooling jacket for

continuous cooling of the motor by the pumped

liquid and long-life deep-groove greased-for-life

ball bearings.



The pump is ready for use as it is fitted with

carrying handle and is supplied with a

10 m mains cable. The mains cable is of the

plug type with glass sealing compound in the

socket to prevent penetration of humidity into

the stator windings.



Liquid:

Liquid temperature range: 0 .. 55 °C


Technical:

Type of impeller: SEMI OPEN

Maximum particle size: 12 mm


Materials:

Pump housing: Stainless steel

Pump housing: DIN W.-Nr. 1.4301

Pump housing: AISI 304

Impeller: Stainless steel

Impeller: DIN W.-Nr. 1.4301

Impeller: AISI 304


Installation:

Pump outlet: Rp 1 1/2

Maximum installation depth: 10 m


Electrical data:

Type of motor: PSC

Power input - P1: 0.9 kW

Rated voltage: 1 x 230 V

Rated current: 4.4 A

Cos phi - power factor: 0,99

Rated speed: 2785 rpm

Capacitor size - run: 16 µF/400 V

Enclosure class (IEC 34-5): IP68

Insulation class (IEC 85): F

Length of cable: 10 m

Type of cable plug: Schuko


Others:

Net weight: 12 kg

Gross weight: 12.5 kg