Harmony wireless output module with 4xPNP 200mA/24VDC outputs for connection to Harmony Hub
- EAN no.: 3606481477071
- LM no.: 7517922247
- Supplier: Schneider Electric
Must login for adding to cart
Description
Type no: ZBRRH
Promotion code: 80080467200
UNSPSC (v. 19.0501): 39122216
HS Code: 85176200
Harmony wireless and batteryless pushbuttons offers freedom of mobillity and installation cost saving at the same time.
The system consist of a transmitter and a receiver communicating with the 2.4 GHz ZigBee Green Power protocol.
With the increasing number of pushbuttons and sensors in the wireless ecosystem it has never been easier to add wireless connected products to your EcoStruxure solution without modifying the existing installation.
It offers the possibility to have a either a stand-alone solution or a direct connection to a PLC or IPC (e.g. Harmony Edge Box) with the Harmony Hub access point.
ZBRRH is a wireless receiver for the Harmony Hub.
It has 4 x PNP outputs with 200 mA/24VDC maximum load.
Configuration is done with the 2 pushbuttons on the front of the module which activates the pairing mode.
The wireless receiver has no permanent radio communication with the Harmony Hub.
A signal indication LED on the front of the receiver display the signal strength.
Be aware that obstacles can interfere with the reception of the signal.
If needed the ZBRA1 relay antenna can be added to improve the signal strength.
The system consist of a transmitter and a receiver communicating with the 2.4 GHz ZigBee Green Power protocol.
With the increasing number of pushbuttons and sensors in the wireless ecosystem it has never been easier to add wireless connected products to your EcoStruxure solution without modifying the existing installation.
It offers the possibility to have a either a stand-alone solution or a direct connection to a PLC or IPC (e.g. Harmony Edge Box) with the Harmony Hub access point.
ZBRRH is a wireless receiver for the Harmony Hub.
It has 4 x PNP outputs with 200 mA/24VDC maximum load.
Configuration is done with the 2 pushbuttons on the front of the module which activates the pairing mode.
The wireless receiver has no permanent radio communication with the Harmony Hub.
A signal indication LED on the front of the receiver display the signal strength.
Be aware that obstacles can interfere with the reception of the signal.
If needed the ZBRA1 relay antenna can be added to improve the signal strength.