Harmony wireless surfacetemperature and humidity sensor with -25..90°C og 10..98% humidity measuring range and 2.4 GHz Zigbee

Harmony wireless and batteryless pushbuttons offers freedom of mobillity and installation cost saving at the same time.
The system consist of a transmitter and a receiver communicating with the 2.4 GHz ZigBee Green Power protocol.
With the increasing number of pushbuttons and sensors in the wireless ecosystem it has never been easier to add wireless connected products to your EcoStruxure solution without modifying the existing installation.
It offers the possibility to have a either a stand-alone solution or a direct connection to a PLC or IPC (e.g. Harmony Edge Box) with the Harmony Hub access point.

ZBRTT1 is a battery powered and wireless surface temperature and humidity sensor.
The measuring range for temperature is -25..90°C with an accuracy of +/- 1°C and has build-in magnets for mounting directly on a surface.
The measuring range for humidity is 10..98% with an accuracy of 2%.
In normal mode, the sensor provide a measurement every 120 seconds but this can be changed with a ZigBee command.
On the right side of the sensor is a pushbutton for configuration and pairing of the sensor with an access point.
A green LED next to the pushbutton indicate status of the sensor.
The operating temperature is -25..40°C and it has IP54 protection rating.

ZBRTT1 can only be used in combination with the Harmony Hub.