HDW0776121 - Wall mounted HD 772x610x210
- EAN no.: 8713574227620
- LM no.: 7811113338
- Supplier: nVent HOFFMAN
Must login for adding to cart
Description
Type no: HDW0776121
Promotion code: 80060678040
UNSPSC (v. 19.0501): 39121301
HS Code: 85381000
Material:
Body: 1.5 mm. Door: 2 mm. AISI 304L pre-grained stainless steel. Mounting plate: 2 mm galvanized steel.
Body:
Monoblock body, folded and seam welded. The top of the body is equipped with a sloping roof at an angle of 30 degrees towards the front, ending with a 30 mm overhang to avoid any draining liquids from dripping onto the gasket and the door.
Door:
Corner formed in one piece with a sloping angle of 8° on all sides. Surface mounted with 120° opening. Concealed hinges with captive pin. Can be mounted to give left or right hand opening (machining is not required).
Internal hinge:
The door hinge has been especially designed to fit concealed inside the enclosure once the door is closed, avoiding dirt deposits that would accumulate if it were outside, thus making the enclosure easy to clean.
Gasket:
Sealing is ensured by an all-round one piece removable blue silicone gasket. The silicone is FDA 21 CFR 177.2600 compliant.
Lock:
HD lock made of stainless steel AISI 316L with blue silicone gasket, the lock conforms with norm DIN EN 1672-2:2009.
Mounting plate:
Fixed onto M8 studs welded on the rear of the enclosure. All sides from 800 mm and above are strengthened by folded edges. The mounting plate is marked vertically at 10 mm intervals for easy horizontal positioning of equipment.
Cable access:
No gland openings as standard to avoid hygiene risks.
Protection:
Corresponds with IP 66/69/69K | TYPE 4X, 12, 13 | IK08.
Finish:
400 Pre-grained stainless steel, polished to Ra < 0.8 µm.
Delivery:
Enclosure with door, mounting plate, metallic key and mounting accessories.
Additional information:
For accessories on the outside of the enclosure please see our HD accessories section.
Body: 1.5 mm. Door: 2 mm. AISI 304L pre-grained stainless steel. Mounting plate: 2 mm galvanized steel.
Body:
Monoblock body, folded and seam welded. The top of the body is equipped with a sloping roof at an angle of 30 degrees towards the front, ending with a 30 mm overhang to avoid any draining liquids from dripping onto the gasket and the door.
Door:
Corner formed in one piece with a sloping angle of 8° on all sides. Surface mounted with 120° opening. Concealed hinges with captive pin. Can be mounted to give left or right hand opening (machining is not required).
Internal hinge:
The door hinge has been especially designed to fit concealed inside the enclosure once the door is closed, avoiding dirt deposits that would accumulate if it were outside, thus making the enclosure easy to clean.
Gasket:
Sealing is ensured by an all-round one piece removable blue silicone gasket. The silicone is FDA 21 CFR 177.2600 compliant.
Lock:
HD lock made of stainless steel AISI 316L with blue silicone gasket, the lock conforms with norm DIN EN 1672-2:2009.
Mounting plate:
Fixed onto M8 studs welded on the rear of the enclosure. All sides from 800 mm and above are strengthened by folded edges. The mounting plate is marked vertically at 10 mm intervals for easy horizontal positioning of equipment.
Cable access:
No gland openings as standard to avoid hygiene risks.
Protection:
Corresponds with IP 66/69/69K | TYPE 4X, 12, 13 | IK08.
Finish:
400 Pre-grained stainless steel, polished to Ra < 0.8 µm.
Delivery:
Enclosure with door, mounting plate, metallic key and mounting accessories.
Additional information:
For accessories on the outside of the enclosure please see our HD accessories section.