Karnasch Carbide tipped annular cutter Nitto/Weldon shaft Ø22 x 80mm
- EAN no.: 4046781049070
- LM no.: 4492854118
- Supplier: Helmuth A. Jensen
Must login for adding to cart
Description
Type no.: 792201650N22
Promotion code: 40220085302
UNSPSC (v. 19.0501): 27112826
HS Code: 82075050
Karnasch carbide tipped annular cutter HARD-LINE is exclusively equipped with Sandvik carbide teeth.
Karnasch carbide tipped annular cutter HARD-LINE is made with a conical helix for clean chip flow and highest cutting ability even with difficult material.
Please remember a Karnasch ejector pin - there are 2 options:
- 2-part ejector pin where the front can be removed after 50mm cutting if taper holder cannot absorb the full length pin.
792201427 "7,98 x 130 mm" that match Karnasch Carbide Tipped annular cutters with Nitto/Weldonshank HARD-LINE 80 (=Cutting depth 80 mm) in diameter Ø 18-50 mm.
- 1-part ejector pin
792201439 "7,98 x 130 mm" that match Karnasch Carbide Tipped annular cutters with Nitto/Weldonshank HARD-LINE 80 (=Cutting depth 80 mm) in diameter Ø 18-50 mm.
USAGE:
Besides maximum cutting capacity in all kind of steels provide only carbide tipped annular cutters:
Drilling in hardened steel up to 40 Rockwell [HRC] and strength of 1400 N
Drilling in all sorts of stainless steel
Drilling in most difficult alloys [Hardox/Inconel/Titan]
Drilling also excellent in all non-ferrous material such as alu, copper, brass and similar.
Combination shank NITTO KOHKI "ONE TOUCH" / WELDON SHANK 19 MM (3/4")
Observe that there is only one Weldon clamping face.
Karnasch carbide tipped annular cutter HARD-LINE is made with a conical helix for clean chip flow and highest cutting ability even with difficult material.
Please remember a Karnasch ejector pin - there are 2 options:
- 2-part ejector pin where the front can be removed after 50mm cutting if taper holder cannot absorb the full length pin.
792201427 "7,98 x 130 mm" that match Karnasch Carbide Tipped annular cutters with Nitto/Weldonshank HARD-LINE 80 (=Cutting depth 80 mm) in diameter Ø 18-50 mm.
- 1-part ejector pin
792201439 "7,98 x 130 mm" that match Karnasch Carbide Tipped annular cutters with Nitto/Weldonshank HARD-LINE 80 (=Cutting depth 80 mm) in diameter Ø 18-50 mm.
USAGE:
Besides maximum cutting capacity in all kind of steels provide only carbide tipped annular cutters:
Drilling in hardened steel up to 40 Rockwell [HRC] and strength of 1400 N
Drilling in all sorts of stainless steel
Drilling in most difficult alloys [Hardox/Inconel/Titan]
Drilling also excellent in all non-ferrous material such as alu, copper, brass and similar.
Combination shank NITTO KOHKI "ONE TOUCH" / WELDON SHANK 19 MM (3/4")
Observe that there is only one Weldon clamping face.