Karnasch Ejector Pin 7,98x130 Split in 2 parts for Karnasch Carbide Tipped annular cutters with Nitto/Weldonshaft 80mm with diameter 18-50 mm
- EAN no.: 4046781033321
- LM no.: 4492854146
- Supplier: Helmuth A. Jensen
Must login for adding to cart
Description
Type no.: 792201427
Promotion code: 40220085302
UNSPSC (v. 19.0501): 27112826
HS Code: 84679900
Karnasch Ejector Pin split in two parts with total dimension "7,98 x 130 mm" for Karnasch Carbide Tipped annular cutters with Nitto/Weldonshaft HARD-LINE 80mm (Cutting depth = 80 mm) in diameter 18-50 mm. Karnasch art. 20.1427
USAGE:
Insert piece (1) into the core drill shank.
Push piece (2) onto part (1). Drill as deep as 50 mm cutting depth. Then remove piece (2) and continue drilling.
Why using 2-parts ejector pins?
Usually, standard Morse taper holders have a cutting depth capacity of 50 mm. If no extra-long holders are used, you need for cutting depths above 50 mm 2-part ejector pins.
USAGE:
Insert piece (1) into the core drill shank.
Push piece (2) onto part (1). Drill as deep as 50 mm cutting depth. Then remove piece (2) and continue drilling.
Why using 2-parts ejector pins?
Usually, standard Morse taper holders have a cutting depth capacity of 50 mm. If no extra-long holders are used, you need for cutting depths above 50 mm 2-part ejector pins.