KEMA RTV-650 red high-temp silicone 226G
- EAN no.: 5709894548401
- LM no.: 3356548400
- Supplier: Itw Chemical Products
Must login for adding to cart
Description
Type no: 54840
Promotion code: 30620390050
UNSPSC (v. 19.0501): 31201605
HS Code: 32089099
Strong and versatile industrial silicone rubber. Electrical insulating. Binder against pure metal, glass, vinyl, rubber, plastic and concrete, etc. Resistant to oils, diesel oil, transmission oil, lubricants, glycol, water and steam, etc.
NB! Do not use the product to the carburettors or other places where the seal will be in constant contact with gasoline. Replaces seals of cork, paper, felt and rubber. Particularly suitable for high compression engines. Fast and efficient manufacture of gaskets regardless of size and shape. Can be used in both horizontal and vertical surfaces.
properties:
· Gasket
· High Temperature
· Low odor
· Leakproof
· Solid
· Temperature range: -50 ° to + 300 ° C
· Compressive strength: 360 kg / cm2
Application: Clean surfaces thoroughly. Apply one surface RTV silicone in a 3-4 mm thick layer when the applied layer is surface dry, mount the parts in the usual way. If a temporary installation, applied to the second surface of a thin film of oil before installing. Excess paste is cleaned with a knife or a sharp cleaning fluid.
Cure time: Depending on the relative humidity, layer thickness, and the amount of the silicone gum that is encapsulated. When layer thickness of 3 mm, the rubber being cured after 24 hours at room temperature and 50% relative humidity. By meta / metal joints should overfladelapningen therefore only be 25 mm.
NB! Do not use the product to the carburettors or other places where the seal will be in constant contact with gasoline. Replaces seals of cork, paper, felt and rubber. Particularly suitable for high compression engines. Fast and efficient manufacture of gaskets regardless of size and shape. Can be used in both horizontal and vertical surfaces.
properties:
· Gasket
· High Temperature
· Low odor
· Leakproof
· Solid
· Temperature range: -50 ° to + 300 ° C
· Compressive strength: 360 kg / cm2
Application: Clean surfaces thoroughly. Apply one surface RTV silicone in a 3-4 mm thick layer when the applied layer is surface dry, mount the parts in the usual way. If a temporary installation, applied to the second surface of a thin film of oil before installing. Excess paste is cleaned with a knife or a sharp cleaning fluid.
Cure time: Depending on the relative humidity, layer thickness, and the amount of the silicone gum that is encapsulated. When layer thickness of 3 mm, the rubber being cured after 24 hours at room temperature and 50% relative humidity. By meta / metal joints should overfladelapningen therefore only be 25 mm.