KEMA ZN-595 zink-spray 500ML
- EAN no.: 5709894252858
- LM no.: 3356252840
- Supplier: Itw Chemical Products
Must login for adding to cart
Description
Type no: 25285
Promotion code: 30620390075
UNSPSC (v. 19.0501): 31211501
HS Code: 32089099
Zn-595 with the same properties as hot dip galvanizing. Provides corrosion protection on all clean metal surfaces.
Surface becomes strong and suitable for painting or varnishing. Also providing corrosion protection without finishing! For surface of galvanized parts, repair of scratches on galvanized surfaces (see DIN 50976)
cavity sealing, undercoating and protection.
Used for soundproofing systems, exhaust and air systems, suction toads, elbows, heat exchangers, oil coolers. The product provides cathodic protection in a corrosive environment and can withstand sudden violent thermal load up to + 500 ° C.
Usable for steel structures, drill holes and welds in connection with lattice structures, steel buildings, steel doors and frames were later added, garage doors, steel façades, guardrails, bridges and other demanding steel structures.
For outdoor piping. As a primer in all industries, for example. auto, agriculture, aircraft, ships and machines.
properties:
· Quick-drying long-term protection of metal surfaces
· Supplement hot galvanizing
· About 92% pure zinc in the coating
· Corrosion protection according to DIN 50021 and 53167
· Crack-resistance, can be recoated
· Heat resistant up to + 500 ° C
· Salt spray tested at least 540 hours
· Weatherproof, resistant to frost
application:
Pretreatment of topics: Only pure metal surfaces suitable for galvanizing. Iron, steel and tinplate degreased, abraded metal polished with sandpaper or wire brush. Larger surfaces can be sandblasted. Shake can thoroughly before use.
Apply in cross- or circling at a distance of 20-30 cm. Optimal protection is achieved by 2-3 treatments
Surface becomes strong and suitable for painting or varnishing. Also providing corrosion protection without finishing! For surface of galvanized parts, repair of scratches on galvanized surfaces (see DIN 50976)
cavity sealing, undercoating and protection.
Used for soundproofing systems, exhaust and air systems, suction toads, elbows, heat exchangers, oil coolers. The product provides cathodic protection in a corrosive environment and can withstand sudden violent thermal load up to + 500 ° C.
Usable for steel structures, drill holes and welds in connection with lattice structures, steel buildings, steel doors and frames were later added, garage doors, steel façades, guardrails, bridges and other demanding steel structures.
For outdoor piping. As a primer in all industries, for example. auto, agriculture, aircraft, ships and machines.
properties:
· Quick-drying long-term protection of metal surfaces
· Supplement hot galvanizing
· About 92% pure zinc in the coating
· Corrosion protection according to DIN 50021 and 53167
· Crack-resistance, can be recoated
· Heat resistant up to + 500 ° C
· Salt spray tested at least 540 hours
· Weatherproof, resistant to frost
application:
Pretreatment of topics: Only pure metal surfaces suitable for galvanizing. Iron, steel and tinplate degreased, abraded metal polished with sandpaper or wire brush. Larger surfaces can be sandblasted. Shake can thoroughly before use.
Apply in cross- or circling at a distance of 20-30 cm. Optimal protection is achieved by 2-3 treatments