Movement detector LK FUGA PIR 160 10A with white top cover

Schneider Electric LK FUGA new motion sensor with built-in automatic push button 10A relay switch. This is an insert with a central cover plate in color white with LED, enabling you to find the device easily in the darkness. It is possible to set the automatic switching on when motion is detected, depending on the level of illumination (5-500 lux). The sensor type of this motion detector is passive infrared (PIR). The operating distance can reach as far as 8 meters. It has a horizontal detection angle of 160⁰ The time delay of this movement detector is 1 sec to 30 min. Primary motion detector and secondary motion detector function is possible thus increasing detection area Ideal solution for staircases, hallways, low-traffic areas for Residential. Ideal solution for staircases, hallways, low-traffic areas for Small Office Buildings. The switch works on nominal voltage 230V AC, 50 Hz The loads handled are LED 200W, Incandescent lamps 2200W, Halogen lamps 2000W and CFL 200W Also Low voltage halogen lamps with electronic transformer can be controlled up to 1050VA and with ferromagnetic transformer up to 500VA Nominal current is 10 A, 140 μF, 10 A cosϕ = 0.6. Fuse protection 13 A circuit breaker. Operating temperature 5 °C to 40 °C The fixing mode of this device is by screws. Flush mounting is supported so that its box can be recessed into the surface and unexposed. The dimensions of switch are 44.8 x 44.8 x 43.8 mm (without frame). Net weight 53 gr Made of ABS (acrylonitrile butadiene-styrene), PC (polycarbonate) GF10 FR, metal material, this movement detector is very reliable and resistant. The color of the cover plate is white with a mat surface. White is RAL 9003. IP degree is IP20. Operating temperature -5⁰C to +45⁰C. Relative humidity of environment 5% to 95% Delivered in single packaging Insert with a cover plate. This device is to be completed with FUGA frame. The frame is ordered separately. The new LK FUGA range features more user-friendly and reliable mounting, modern distinctive frame design, comprehensive functionalities and innovative accessories, etc. The development of the new LK FUGA range has particularly focused on simplicity, flexibility and efficiency, which is upgraded to meet all requirements for modern electrical installations. What's more, it well satisfied the standards of EN 300-328, EN 301-489-17, EN 60669-2-1, EN 60730-2-7. It obtained CE, EAC, FIMKO, NEMKO, NF, SEMKO, VDE certificate as well.