Parker SAE Split Flange Halves, CF SAE Split Flange Halves, CF FHS64/12CFX

Flange clamps are used for providing the holding power to the 4 bolt Flange connection. They are offered in split and captive (one-piece) versions. The captive ones are also offered with either drilled or tapped bolt holes. The captive Flange clamp with tapped holes is used while connecting a tube to another tube or a hose. The split clamps make it easy to assemble the connection in close quarters. They also enable an easy removal of the Flange head component, such as a hose assembly, by loosening all four bolts and removing one clamp half. • Environment • Industrial • Machine Tools • Marine • Materials Handling • Mobile Industries • Power Generation • Press Building • Ability to connect up to 5 inch O.D. tube (ISO 6162-1 only) • Much lower tightening torque required from the four bolts compared to equivalent threaded size port. • Less tightening torque means smaller wrenches and wrench swing clearances – providing ease of assembly in tight working environment. • Up to 6000 psi capability through 3“ size (ISO 6162-2 only) • Use up to 420 bar at the ISO 6164 Flange sizes from 3/8" to 4". • Single seal point between tube/pipe/hose assembly and the port • Ease of disassembly through use of split clamps • Suitable for general hydraulic and industrial applications. 4 bolt Flange connection ISO 6162-1/2 (SAE J518 Code 61/62) and ISO 6164 is a proven leak-free connection, especially suited for larger sizes. As a result, it has achieved worldwide acceptance. The connection’s success is in its simplicity. It is a static face seal using a high durometer O-ring for the seal and clamps and bolts for holding power. The O-ring seal is compressed between the bottom of the groove in the Flange head and the flat surface of the port or Flange pad, providing a reliable soft seal.