Pre-wired enclosure Resi9 3x20 modules 6x2P + 3x4P ways 40A switch-disconnector as incomer

This Resi9 CX pre-wired enclosure is a surface mounted distribution enclosure. This plastic enclosure is composed of 3 rows of 13 modules of 18mm and can monitor three phase network. It provides 6 ways of 2P, and 3 ways of 4P up to 16A. It contains a switch-disconnector as the main device and a surge protection device, followed by 2 residual current circuit breakers, and 9 miniature circuit breakers. This enclosure is dedicated to indoor installation. The IP degree of protection is IP30 without door and IP40 with door. An optional door can be installed over the cover. The colour of the enclosure is white (RAL 9003). It is intended for new or renovated installations in residential, small buildings, and industry. The cables can enter via the 4 sides or via the back of the enclosure. It is equipped with a back plate and a front cover with notch. It is provided with a removable DIN rail. It comes with 2 comb busbars, a tooth cover, and a terminal block. Marking label, label protector, and blanking plate are also delivered within the product. The overvoltage category is III. The power dissipated by the enclosure is 29W. The In rated current is up to 40A. This product complies with IEC 61439-1 and 3 standards. The dimensions are (W) 252mm x (H) 500mm x (D) 120mm. The width in 9mm pitches is 78. The enclosure material is self-extinguishing material. Its resistance to flames and to abnormal heat is 650°C conforming to EN/IEC 60695-2-11 standard. It is halogen-free. According to EN/IEC 62262 standard, the IK degree of protection is IK08. The operating temperature is from -15°C to +40°C.