RECESSED HANDLE PLUG-IN L: 100 L1: 115 H: 90 Model: A ALUMINIUM BLACK ANODIZED COMP: POLYAMIDE
- EAN no.: 4059245129669
- LM no.: 4059245129669
- Supplier: Heinrich Kipp
Must login for adding to cart
Description
Type no: K0238.10011
Promotion code: 30490020
UNSPSC (v. 19.0501): 31162801
HS Code: 76169990
Material: Tray handle in aluminium profile, end caps polyamide; Model A: mounting by rubber insert
model: Handle glass-bead, satin finish and black anodized or Natur colour anodized. Rubber profile black. Fastening screws galvanized.
Note: The Tray Handles Model A can be used without screw mounting with sheet strengths of 1-2.5 mm. Two rubber inserts ensure absolutely firm mounting. Two cross-slots offset by 90° for M4 screws allow earth/ground connection and can serve as a mounting aid for additional add-on parts.
Assembly: After fitting the lower rubber profile, press the two side caps onto the handle. Next press the handle over the lower edge of the mounting cutout at a 45° angle and then push it up against the housing panel. Now, depending on which type is being used, push the 2nd rubber profile into the upper groove or fix in place with 2 countersunk screws.
model: Handle glass-bead, satin finish and black anodized or Natur colour anodized. Rubber profile black. Fastening screws galvanized.
Note: The Tray Handles Model A can be used without screw mounting with sheet strengths of 1-2.5 mm. Two rubber inserts ensure absolutely firm mounting. Two cross-slots offset by 90° for M4 screws allow earth/ground connection and can serve as a mounting aid for additional add-on parts.
Assembly: After fitting the lower rubber profile, press the two side caps onto the handle. Next press the handle over the lower edge of the mounting cutout at a 45° angle and then push it up against the housing panel. Now, depending on which type is being used, push the 2nd rubber profile into the upper groove or fix in place with 2 countersunk screws.