ROCOL COLD GALVANISING Spray 400ML
- EAN no.: 5024747695157
- LM no.: 3351630100
- Supplier: Itw Chemical Products
Must login for adding to cart
Description
Type no: 63010000
Promotion code: 30620400590
UNSPSC (v. 19.0501): 31211501
HS Code: 32089099
ROCOL COLD GALVANISING Spray offers ultra long term corrosion protection for metal components requiring a permanent zinc-rich mid-grey coating. Ideal for components that cannot be galvanised using a hot dip process. It can also be used to repair the surface of galvanised components that have been damaged or repaired prior to welding or other mechanical operations. Typical Applications
Ports and docks, marine and offshore, farm and other industrial equipment:
Steel door and window frames, fences, gates, garage doors, trailer and caravan chassis, couplings, internal car body panels, structural steel and guard rails, welded seams, drains and boilers, storage tanks, piping and fittings etc. Features and Benefits
Ultra long term protection for ferrous metals – 3500 hours salt spray test.
95% zinc-rich coating – provides sacrificial cathodic protection to ferrous metals.
Self-healing mechanism – scratches are re-sealed by the formation of zinc oxide and carbonates.
Meets the requirements of ISO 3549 and ISO 1461 section 6.3.
Unique combination of flexibility and hardness – highly resistant to peeling, flaking and abrasion.
Exceptional water resistance – tough polymeric zinc-rich film.
Outstanding temperature resistance: -30°C to +450°C.
High performance coating or primer – contains pure zinc, synthetic resin and additives.
Non-toxic formulation – lead and chromate free.
Excellent repair for galvanised surfaces – adheres well to metal surfaces. Directions for Storage and Use
Apply to a clean, degreased, dry surface for best results.
Remove any residual rust and scale with a wire brush or other abrasive method.
Rust removers based on phosphoric acid which leave an electrically insulating film should not be used as this will interfere with the galvanic protection action.
Clean the area to be treated with a non-residue solvent cleaner such as ROCOL INDUSTRIAL CLEANER Rapid Dry Spray, p/c 34131, and ensure the solvent has evaporated completely before continuing.
Invert can and shake vigorously for 2 minutes after the agitator ball starts to rattle. Shake frequently during use.
Hold upright and spray from a distance of approximately 15-30 cm.
Apply in light, even layers:
o For best results apply 2 light films at 15-20 minute intervals rather than 1 heavy film.
o Additional layers can be applied at 15-20 minute intervals.
Clear nozzle after use - invert can and spray for 3-5 seconds until only p
Ports and docks, marine and offshore, farm and other industrial equipment:
Steel door and window frames, fences, gates, garage doors, trailer and caravan chassis, couplings, internal car body panels, structural steel and guard rails, welded seams, drains and boilers, storage tanks, piping and fittings etc. Features and Benefits
Ultra long term protection for ferrous metals – 3500 hours salt spray test.
95% zinc-rich coating – provides sacrificial cathodic protection to ferrous metals.
Self-healing mechanism – scratches are re-sealed by the formation of zinc oxide and carbonates.
Meets the requirements of ISO 3549 and ISO 1461 section 6.3.
Unique combination of flexibility and hardness – highly resistant to peeling, flaking and abrasion.
Exceptional water resistance – tough polymeric zinc-rich film.
Outstanding temperature resistance: -30°C to +450°C.
High performance coating or primer – contains pure zinc, synthetic resin and additives.
Non-toxic formulation – lead and chromate free.
Excellent repair for galvanised surfaces – adheres well to metal surfaces. Directions for Storage and Use
Apply to a clean, degreased, dry surface for best results.
Remove any residual rust and scale with a wire brush or other abrasive method.
Rust removers based on phosphoric acid which leave an electrically insulating film should not be used as this will interfere with the galvanic protection action.
Clean the area to be treated with a non-residue solvent cleaner such as ROCOL INDUSTRIAL CLEANER Rapid Dry Spray, p/c 34131, and ensure the solvent has evaporated completely before continuing.
Invert can and shake vigorously for 2 minutes after the agitator ball starts to rattle. Shake frequently during use.
Hold upright and spray from a distance of approximately 15-30 cm.
Apply in light, even layers:
o For best results apply 2 light films at 15-20 minute intervals rather than 1 heavy film.
o Additional layers can be applied at 15-20 minute intervals.
Clear nozzle after use - invert can and spray for 3-5 seconds until only p