Smoke control panel 10A - touch screen - natural & smoke ventilation - 2 rooms / zones
- EAN no.: 5706654428287
- LM no.: 7885504041
- Supplier: WINDOWMASTER
Must login for adding to cart
Description
Type no: WSC 310 P 0202 E7
Promotion code: 80140600020
UNSPSC (v. 19.0501): 46191505
HS Code: 85371091
WSC 310 is part of the CompactSmoke™ series, a compact smoke panel for control of ±24V DC actuators or actuators with MotorLink® with a total power consumption up to max. 10A. The panels can be used in small and medium sized buildings as well as in building sections e.g. stair cases and restaurants.
The smoke controller can also be used in our indoor climate solution NV Embedded®.
The panels has:
- up to 2 smoke / 2 daily ventilation groups
- 10A
Touch screen
The panel has a build in 2½” LCD touch screen which makes it easy to configure, commission and maintain the panel – also without the need for a PC. System errors are described precisely on the touch screen to facilitate troubleshooting and initialization.
Opening speeds
This panel gives the possibility of up to three actuator speeds depending of the type of the connected actuator:
a) ±24V DC standard actuator - 1 speed (H&S)
b) MotorLink® actuator - 2 speeds (H&S / manually operated)
c) MotorLink® actuator and bus communication - 3 speeds (H&S / manually operated / automatically)
The different speeds
H&S: a fast speed with H&S ventilation and security functions.
H&S has always first priority Manually operated: a faster and audiable speed when manually operated by comfort ventilation
Automatically: a slow and almost soundless speed, when controlled automatically by comfort ventilation
Ease of cabling
The use of bus technology for the break glass units means that the need for cabling in the building is significantly reduced. The break glass unit bus are initialized directly on the panel‘s touch screen.
Smoke ventilation based on wind direction
The smoke ventilation panel can be set so that opening and closing of windows are determined by wind direction and speed. This means that facades can be utilized efficiently as part of the smoke ventilation without acquisition of additional modules aside from a wind direction sensor.
Bus communication
Comfort ventilation also possible with KNX, BACnet IP or BACnet MSTP due to bus technology together with eg. NV Advance®.
Certification
Approved and certified according to EN 12101-10.
Output current 10
Field Bus BacNet
KNX
ModBus
Primary Voltage 230V AC, 50Hz (85-264V AC, 47-63Hz)V AC
Smoke zones 2
Ventilation groups 2
Motor Group Options 2 motor groups
Motor line options 2 motor lines
IP rating IP 54
Leakage current max 1.2mA @ 240VAC
Material Metal housing
Size 300 x 400 x 120 (H x W x D)mm
Weight incl. batteries 10.8kg
Weight excl. batteries 6kg
Colour options Grey (RAL 7035)
Networked standby consumption
Delivery includes
Smoke control panel WSC 310 PLUS (10A) Delivered with: WSA 501 (10kΩ-resistors, 10 pcs) WSA 510 end of line module (2 pcs.) Back-up batteries (2 x WSA 007)
The smoke controller can also be used in our indoor climate solution NV Embedded®.
The panels has:
- up to 2 smoke / 2 daily ventilation groups
- 10A
Touch screen
The panel has a build in 2½” LCD touch screen which makes it easy to configure, commission and maintain the panel – also without the need for a PC. System errors are described precisely on the touch screen to facilitate troubleshooting and initialization.
Opening speeds
This panel gives the possibility of up to three actuator speeds depending of the type of the connected actuator:
a) ±24V DC standard actuator - 1 speed (H&S)
b) MotorLink® actuator - 2 speeds (H&S / manually operated)
c) MotorLink® actuator and bus communication - 3 speeds (H&S / manually operated / automatically)
The different speeds
H&S: a fast speed with H&S ventilation and security functions.
H&S has always first priority Manually operated: a faster and audiable speed when manually operated by comfort ventilation
Automatically: a slow and almost soundless speed, when controlled automatically by comfort ventilation
Ease of cabling
The use of bus technology for the break glass units means that the need for cabling in the building is significantly reduced. The break glass unit bus are initialized directly on the panel‘s touch screen.
Smoke ventilation based on wind direction
The smoke ventilation panel can be set so that opening and closing of windows are determined by wind direction and speed. This means that facades can be utilized efficiently as part of the smoke ventilation without acquisition of additional modules aside from a wind direction sensor.
Bus communication
Comfort ventilation also possible with KNX, BACnet IP or BACnet MSTP due to bus technology together with eg. NV Advance®.
Certification
Approved and certified according to EN 12101-10.
Output current 10
Field Bus BacNet
KNX
ModBus
Primary Voltage 230V AC, 50Hz (85-264V AC, 47-63Hz)V AC
Smoke zones 2
Ventilation groups 2
Motor Group Options 2 motor groups
Motor line options 2 motor lines
IP rating IP 54
Leakage current max 1.2mA @ 240VAC
Material Metal housing
Size 300 x 400 x 120 (H x W x D)mm
Weight incl. batteries 10.8kg
Weight excl. batteries 6kg
Colour options Grey (RAL 7035)
Networked standby consumption
Delivery includes
Smoke control panel WSC 310 PLUS (10A) Delivered with: WSA 501 (10kΩ-resistors, 10 pcs) WSA 510 end of line module (2 pcs.) Back-up batteries (2 x WSA 007)