Schneider Electric
Transmitter for wireless and batteryless push button, plastic, black
- EAN no.: 3606480334726
- LM no.: 7517903208
- Supplier: Schneider Electric
Must login for adding to cart
Description
Type no: ZBRT1
Promotion code: 80080467200
UNSPSC (v. 19.0501): 39122221
HS Code: 85269200
Harmony wireless and batteryless pushbuttons offers both mobility and installation cost savings at the same time.
The system consist of a transmitter and a receiver communicating on a 2,4 GHz ZigBee Green Power protocol.
With the increasing number of components in the wireless eco-system, it has never been easier to add wireless components to your EcoStruxure solution. without having to change the exisiting installation.
It is possible to select between a stand-alone solution or a direct connection to a PLC or iPC (i.e. the Harmony Edge Box) through the access point, Harmony Hub.
The wireless pushbuttons have a general range of up to 100 meter between transmitter and receiver, when the components are mounted in a free air environment.
If the receiver is mounted inside a metal cabinet, the range is reduced to a maximum of 25 meters, but it can easily be increased with the use of the relay antenna ZBRA1.
ZBRT1 is a wireless transmitter with singel action, sending a rising edge signal.
This makes it possible to use the following functions together with a ZBRRA receiver:
- Momentary (one-shot pulse).
- Bistable.
- Start/Stop.
The wireless transmitter convert the mechanical energy from the pushbutton to a radio signal and do not contain any battery.
It has the same form factor and size as a normal contact block which does it compatible with most standard Harmony pushbuttons.
It is also possible to add it to existing pushbuttons and combine it with wired contacts blocks.
NOTE: It is not recommended to mount the wireless transmitter in a metal control station as the signal strength will be significantly reduced.
The system consist of a transmitter and a receiver communicating on a 2,4 GHz ZigBee Green Power protocol.
With the increasing number of components in the wireless eco-system, it has never been easier to add wireless components to your EcoStruxure solution. without having to change the exisiting installation.
It is possible to select between a stand-alone solution or a direct connection to a PLC or iPC (i.e. the Harmony Edge Box) through the access point, Harmony Hub.
The wireless pushbuttons have a general range of up to 100 meter between transmitter and receiver, when the components are mounted in a free air environment.
If the receiver is mounted inside a metal cabinet, the range is reduced to a maximum of 25 meters, but it can easily be increased with the use of the relay antenna ZBRA1.
ZBRT1 is a wireless transmitter with singel action, sending a rising edge signal.
This makes it possible to use the following functions together with a ZBRRA receiver:
- Momentary (one-shot pulse).
- Bistable.
- Start/Stop.
The wireless transmitter convert the mechanical energy from the pushbutton to a radio signal and do not contain any battery.
It has the same form factor and size as a normal contact block which does it compatible with most standard Harmony pushbuttons.
It is also possible to add it to existing pushbuttons and combine it with wired contacts blocks.
NOTE: It is not recommended to mount the wireless transmitter in a metal control station as the signal strength will be significantly reduced.