Triarca ELdistribution Elmont Fuse switch disconnector DIN 2 without clamps (50-240 mm²)
- EAN no.: 5711255959818
- LM no.: 8211959816
- Supplier: TRIARCA A/S
Must login for adding to cart
Description
Type no.: 595981
Promotion code: 80080675005
UNSPSC (v. 19.0501): 39121301
HS Code: 85363090
Triarca’s DIN 2 fuse switch disconnector is a 4 pole switch designed for NH 2 fuses, offering a robust and reliable solution for medium capacity electrical distribution.
Its integrated hook mounting system ensures fast, safe and tool efficient installation in Triarca cable cabinets equipped with the IP20 busbar system.
Just like all Triarca fuse switches, both the switch unit and the cable connection clamps for service cables are mounted using one single tool:
848606 — Triarca Insulated 5 mm Allen Key with 3/8” square holder.
This ensures consistent installation procedures and minimum tooling requirements throughout the entire system.
Electrical Data
(All values below are reproduced exactly as listed in your original Danish document.)
• Type: DIN 2 Fuse Switch
• Item number: 595981
• Module width (MB × 6 mm): 26
• V terminals suitable for cable cross sections: 50–300 mm²
• IP classification (EN 60529): IP20
Operational Characteristics
• Rated operational current, Ie: 400 A (Note 1)
• Rated operational voltage, Ue: 500 V
• Rated insulation voltage, Ui: 1000 V
• Rated impulse withstand voltage, Uimp: 6 kV
• Rated short circuit current (NH 2 gG fuses): 35 kA
• Fuse type: NH 2
• Utilisation category: AC 23B
• Power dissipation: 34 W
• Pollution degree: 3
Logistics
• Weight: 5.4 kg
• EAN number: 5711255959818
Required Accessories (Purchased Separately)
(All product numbers preserved exactly as in your document)
• 595919 — OC 50–95 Clamp Set (50–95 mm² Cu/Al, SE/SM)
• 595920 — OC 95–240 Clamp Set (95–240 mm² Cu/Al, SE/SM)
• 595991 — OC 95–300 Clamp Set (95–300 mm² Cu/Al, SE/SM)
• 595925 — OC 2×70–240 Clamp Set (2 × 70–240 mm², for parallel cables)
Note 1
When installing multiple fuse switch disconnectors in the same cable cabinet, a derating factor according to EN 61439 1 must be applied.
Its integrated hook mounting system ensures fast, safe and tool efficient installation in Triarca cable cabinets equipped with the IP20 busbar system.
Just like all Triarca fuse switches, both the switch unit and the cable connection clamps for service cables are mounted using one single tool:
848606 — Triarca Insulated 5 mm Allen Key with 3/8” square holder.
This ensures consistent installation procedures and minimum tooling requirements throughout the entire system.
Electrical Data
(All values below are reproduced exactly as listed in your original Danish document.)
• Type: DIN 2 Fuse Switch
• Item number: 595981
• Module width (MB × 6 mm): 26
• V terminals suitable for cable cross sections: 50–300 mm²
• IP classification (EN 60529): IP20
Operational Characteristics
• Rated operational current, Ie: 400 A (Note 1)
• Rated operational voltage, Ue: 500 V
• Rated insulation voltage, Ui: 1000 V
• Rated impulse withstand voltage, Uimp: 6 kV
• Rated short circuit current (NH 2 gG fuses): 35 kA
• Fuse type: NH 2
• Utilisation category: AC 23B
• Power dissipation: 34 W
• Pollution degree: 3
Logistics
• Weight: 5.4 kg
• EAN number: 5711255959818
Required Accessories (Purchased Separately)
(All product numbers preserved exactly as in your document)
• 595919 — OC 50–95 Clamp Set (50–95 mm² Cu/Al, SE/SM)
• 595920 — OC 95–240 Clamp Set (95–240 mm² Cu/Al, SE/SM)
• 595991 — OC 95–300 Clamp Set (95–300 mm² Cu/Al, SE/SM)
• 595925 — OC 2×70–240 Clamp Set (2 × 70–240 mm², for parallel cables)
Note 1
When installing multiple fuse switch disconnectors in the same cable cabinet, a derating factor according to EN 61439 1 must be applied.