Schneider Electric
Wireless and battery less handy box, 1 double action and 1 simple action buttons
- EAN no.: 3606480891120
- LM no.: 7517916376
- Supplier: Schneider Electric
Must login for adding to cart
Description
Type no: ZBRM22BA0
Promotion code: 80080467200
UNSPSC (v. 19.0501): 39122216
HS Code: 85365080
Harmony wireless and batteryless pushbuttons offers both mobility and installation cost savings at the same time.
The system consist of a transmitter and a receiver communicating on a 2,4 GHz ZigBee Green Power protocol.
With the increasing number of components in the wireless eco-system, it has never been easier to add wireless components to your EcoStruxure solution. without having to change the exisiting installation.
It is possible to select between a stand-alone solution or a direct connection to a PLC or iPC (i.e. the Harmony Edge Box) through the access point, Harmony Hub.
The wireless pushbuttons have a general range of up to 100 meter between transmitter and receiver, when the components are mounted in a free air environment.
If the receiver is mounted inside a metal cabinet, the range is reduced to a maximum of 25 meters, but it can easily be increased with the use of the relay antenna ZBRA1.
ZBRM22BA0 is a complete wireless mobile box i robust plastic with 2 wireless pushbuttons with spring-return and a set of 6 caps in different colors.
The two pushbuttons in the mobile box are delivered with two different wireless transmitters.
The top button has a double action transmitter, sending a signal both at rising and falling edge and the bottom one has a single action transmitter.
This makes it possible to use the following functions together with a ZBRRA receiver:
- Momentary (one-shot pulse).
- Momentary (push-and-hold function).
- Bistable output.
- Start/Stop function.
The wireless transmitter convert the mechanical energy from the pushbutton to a radio signal and do not contain any battery.
The protection rating are IP65 and the mobile box can be used in an operating temperature between -25..55 degrees celcius.
ZBRM22BA0 can be used together with one of the stand-alone receivers ZBRRA, ZBRRC or ZBRRD for simple applications.
For more advanced applications or in combination with a PLC, the wireless access point, Harmony Hub, is recommended.
The system consist of a transmitter and a receiver communicating on a 2,4 GHz ZigBee Green Power protocol.
With the increasing number of components in the wireless eco-system, it has never been easier to add wireless components to your EcoStruxure solution. without having to change the exisiting installation.
It is possible to select between a stand-alone solution or a direct connection to a PLC or iPC (i.e. the Harmony Edge Box) through the access point, Harmony Hub.
The wireless pushbuttons have a general range of up to 100 meter between transmitter and receiver, when the components are mounted in a free air environment.
If the receiver is mounted inside a metal cabinet, the range is reduced to a maximum of 25 meters, but it can easily be increased with the use of the relay antenna ZBRA1.
ZBRM22BA0 is a complete wireless mobile box i robust plastic with 2 wireless pushbuttons with spring-return and a set of 6 caps in different colors.
The two pushbuttons in the mobile box are delivered with two different wireless transmitters.
The top button has a double action transmitter, sending a signal both at rising and falling edge and the bottom one has a single action transmitter.
This makes it possible to use the following functions together with a ZBRRA receiver:
- Momentary (one-shot pulse).
- Momentary (push-and-hold function).
- Bistable output.
- Start/Stop function.
The wireless transmitter convert the mechanical energy from the pushbutton to a radio signal and do not contain any battery.
The protection rating are IP65 and the mobile box can be used in an operating temperature between -25..55 degrees celcius.
ZBRM22BA0 can be used together with one of the stand-alone receivers ZBRRA, ZBRRC or ZBRRD for simple applications.
For more advanced applications or in combination with a PLC, the wireless access point, Harmony Hub, is recommended.