Schneider Electric
Wireless push button and non-configurable receiver with 6 colored caps, metal, Ø22, 24 V DC
- EAN no.: 3606480436024
- LM no.: 7517814245
- Supplier: Schneider Electric
Must login for adding to cart
Description
Type no: XB4RFB01
Promotion code: 80080467200
UNSPSC (v. 19.0501): 39122221
HS Code: 85269200
Harmony wireless and batteryless pushbuttons offers both mobility and installation cost savings at the same time.
The system consist of a transmitter and a receiver communicating on a 2,4 GHz ZigBee Green Power protocol.
With the increasing number of components in the wireless eco-system, it has never been easier to add wireless components to your EcoStruxure solution. without having to change the exisiting installation.
It is possible to select between a stand-alone solution or a direct connection to a PLC or iPC (i.e. the Harmony Edge Box) through the access point, Harmony Hub.
The wireless pushbuttons have a general range of up to 100 meter between transmitter and receiver, when the components are mounted in a free air environment.
If the receiver is mounted inside a metal cabinet, the range is reduced to a maximum of 25 meters, but it can easily be increased with the use of the relay antenna ZBRA1.
XB4RFB01 is a complete set with a wireless pushbutton and a stand-alone receiver.
The set contain a complete metal pushbutton with spring-retur with a wireless transmitter and a set of 6 separate caps in different colors.
The wireless transmitter convert the mechanical energy from the pushbutton to a radio signal and do not contain any battery.
It also contain a receiver for DIN-rail mounting with 1 C/O relay output with a maximum load of 3A.
The receiver is paired with the pushbutton in the set from the factory and only offer a momentary (one-shot pulse) function.
Supply voltage for the receiver is 24..240VAC/DC.
NOTE: It is not possible to add additional wireless pushbuttons to this set.
The system consist of a transmitter and a receiver communicating on a 2,4 GHz ZigBee Green Power protocol.
With the increasing number of components in the wireless eco-system, it has never been easier to add wireless components to your EcoStruxure solution. without having to change the exisiting installation.
It is possible to select between a stand-alone solution or a direct connection to a PLC or iPC (i.e. the Harmony Edge Box) through the access point, Harmony Hub.
The wireless pushbuttons have a general range of up to 100 meter between transmitter and receiver, when the components are mounted in a free air environment.
If the receiver is mounted inside a metal cabinet, the range is reduced to a maximum of 25 meters, but it can easily be increased with the use of the relay antenna ZBRA1.
XB4RFB01 is a complete set with a wireless pushbutton and a stand-alone receiver.
The set contain a complete metal pushbutton with spring-retur with a wireless transmitter and a set of 6 separate caps in different colors.
The wireless transmitter convert the mechanical energy from the pushbutton to a radio signal and do not contain any battery.
It also contain a receiver for DIN-rail mounting with 1 C/O relay output with a maximum load of 3A.
The receiver is paired with the pushbutton in the set from the factory and only offer a momentary (one-shot pulse) function.
Supply voltage for the receiver is 24..240VAC/DC.
NOTE: It is not possible to add additional wireless pushbuttons to this set.