WM enc IP66 380x600x210

Material: Body: 1,2 mm mild steel / 1,4 mm MAS0606021R5 and above / 1,5 mm MAS1008026R5 and above, 400 mm depth enclosures. Door: 1,2 mm mild steel / 1,4 mm MAS0606021R5 and above / 1,8 mm MAS1006026R5 and above. Gland plate: 1,4 mm mild steel. Mounting plate: 2 mm galvanized steel. Body: Folded and seam welded. Four 8,5 mm diameter holes for wall fixing, pressed out in 20,4 mm diameter x 2 mm depressions to allow air circulation around the rear part of the enclosure. Door: Surface mounted with 130° opening. Concealed removable hinges with captive pin. Hinges can be mounted to allow left or right hand opening. From height 300 mm and above there are studs to mount door profiles MMDP and from height 600 mm and above the profiles are included as standard. Sealing is ensured by an injected one piece polyurethane gasket. Lock: Customised lock with double grip for easy opening of the door. Double-bit 3 mm insert and 90° movement. 1000 mm high enclosures and above have espagnolette three point locking. Other inserts are available as an accessory. Mounting plate: The mounting plate is marked vertically at 10 mm intervals for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides from 800 mm and above are strengthened by folded edges. By using the AMG accessory the mounting plate position can be adjusted to any depth. Gland Plate Opening: Situated at the far rear of the enclosure to make cabling onto the mounting plate easier. Protection: Complies with IP 66, TYPE 4, 12 and 13. For outdoor installation the use of a rain hood ARF and 100% polyester paint coating is recommended. The corrosion resistance must be taken into consideration.