Schneider Electric
Zelio control relay for 3-phase detection of phase-loss and phase-sequence 1C/O 5A 3x230-400VAC RM17TT00
- EAN no.: 3389119405089
- LM no.: 7523006199
- Supplier: Schneider Electric
Must login for adding to cart
Description
Type no: RM17TT00
Promotion code: 80080463215
UNSPSC (v. 19.0501): 39122332
HS Code: 85364900
Zelio RM17 is a compact series of control relays which is easy to mount on a DIN-rail.
The relays are available for either 1 phase or 3 phase applications and are able to measure the voltage, current, phase-loss, phase-sequence and asymmetry between phases.
With a width of only 17,5 mm they only take up a very limited space on the DIN-rail and they also fit behind the cover of a standard panel.
RM17TT00 is a control relay for phase-loss and phase-sequence in 3-phase applications.
The relay is measuring the typical failures which can occur in a 3-phase application (phase-loss and phase-sequence).
The 3 phases are mounted on the supply L1, L2 and L3 terminals on the top of the relay and the output contacts are located in the bottom.
The output is activated instantanious when powered on if all 3 phases are present and mounted in the right order.
On the front of the relay is a single dial which sets the supply voltage between the 3 phases (208, 220, 380, 400, 415, 440 or 480VAC).
If a phase-fault or phase-sequence fault is detected, the output instantly changes state.
The control relay has a 1 C/O output contact with a maximum load of 5A.
RM17TT00 is self powered through the measuring terminals on the top and the supply voltage can be from 183 to 528 VAC.
The relay can be used with both 50Hz and 60Hz supply voltage.
On the front of the relay is 2 LED's for indication of the relay status.
The green LED indicates that the supply is present and the yellow LED indicates the status of the relay output.
The relays are available for either 1 phase or 3 phase applications and are able to measure the voltage, current, phase-loss, phase-sequence and asymmetry between phases.
With a width of only 17,5 mm they only take up a very limited space on the DIN-rail and they also fit behind the cover of a standard panel.
RM17TT00 is a control relay for phase-loss and phase-sequence in 3-phase applications.
The relay is measuring the typical failures which can occur in a 3-phase application (phase-loss and phase-sequence).
The 3 phases are mounted on the supply L1, L2 and L3 terminals on the top of the relay and the output contacts are located in the bottom.
The output is activated instantanious when powered on if all 3 phases are present and mounted in the right order.
On the front of the relay is a single dial which sets the supply voltage between the 3 phases (208, 220, 380, 400, 415, 440 or 480VAC).
If a phase-fault or phase-sequence fault is detected, the output instantly changes state.
The control relay has a 1 C/O output contact with a maximum load of 5A.
RM17TT00 is self powered through the measuring terminals on the top and the supply voltage can be from 183 to 528 VAC.
The relay can be used with both 50Hz and 60Hz supply voltage.
On the front of the relay is 2 LED's for indication of the relay status.
The green LED indicates that the supply is present and the yellow LED indicates the status of the relay output.