Schneider Electric
Zelio control relay for 3-phase detection of voltage and phase-fault 2C/O 8A 3x230VAC
- EAN no.: 3606480792182
- LM no.: 7523007062
- Supplier: Schneider Electric
Must login for adding to cart
Description
Type no: RM22TR31
Promotion code: 80080463215
UNSPSC (v. 19.0501): 39122332
HS Code: 85364900
The Zelio RM22 control relay range brings to market 2 new key improvements.
- The backlight LED dials for adjustment makes it easy to use in any condition, even in dusty or poorly lit enviroments.
- The built-in testbutton simplifies commissioning and troubleshooting by a push of a button.
RM22TR31 is a controlrelay for measuring 3-phase sequence, fase fault detection and over-/undervoltage.
The measurement is made directly through the supply terminals L1, L2 and L3 on the top of the relay.
The relay has 4 illuminated dials for setting up the relay.
On the top dial you select the measurement range between 200 and 240V and the timing function of the relay.
(This relay is made for a 3x230V net and is used for applications in countries like Norway)
!!!This relay will NOT work in Denmark!!!
The next dial adjust the delay of the output which can be between 0,1 and 30 seconds.
The bottom 2 dials set the maximum over and undervoltage in % in reference to the measuring value on the top dial.
The relay has 2 LED's on the front which indicates if a fault is detected (Def) and the state of the relay output (R).
The testbutton force the output when the timer is powered on.
- The backlight LED dials for adjustment makes it easy to use in any condition, even in dusty or poorly lit enviroments.
- The built-in testbutton simplifies commissioning and troubleshooting by a push of a button.
RM22TR31 is a controlrelay for measuring 3-phase sequence, fase fault detection and over-/undervoltage.
The measurement is made directly through the supply terminals L1, L2 and L3 on the top of the relay.
The relay has 4 illuminated dials for setting up the relay.
On the top dial you select the measurement range between 200 and 240V and the timing function of the relay.
(This relay is made for a 3x230V net and is used for applications in countries like Norway)
!!!This relay will NOT work in Denmark!!!
The next dial adjust the delay of the output which can be between 0,1 and 30 seconds.
The bottom 2 dials set the maximum over and undervoltage in % in reference to the measuring value on the top dial.
The relay has 2 LED's on the front which indicates if a fault is detected (Def) and the state of the relay output (R).
The testbutton force the output when the timer is powered on.