Schneider Electric
Zelio control relay for 3-phase detection of voltage and phase-fault 2C/O 8A 3x400VAC
- EAN no.: 3606480792199
- LM no.: 7523007075
- Supplier: Schneider Electric
Must login for adding to cart
Description
Type no: RM22TR33
Promotion code: 80080463215
UNSPSC (v. 19.0501): 39122332
HS Code: 85364900
The Zelio RM22 control relay range brings to market 2 new key improvements.
- The backlight LED dials for adjustment makes it easy to use in any condition, even in dusty or poorly lit enviroments.
- The built-in testbutton simplifies commissioning and troubleshooting by a push of a button.
RM22TR33 is a controlrelay for measuring 3-phase sequence, fase fault detection and over-/undervoltage.
The measurement is made directly through the supply terminals L1, L2 and L3 on the top of the relay.
The relay has 4 illuminated dials for setting up the relay.
On the top dial you select the measurement range between 380 and 480V.
The value is set to the voltage between 2 phases
The next dial adjust the delay of the output which can be between 0,1 and 30 seconds.
The bottom 2 dials set the maximum over and undervoltage in % in reference to the measuring value on the top dial.
The relay has 2 LED's on the front which indicates if a fault is detected (Def) and the state of the relay output (R).
The testbutton force the output when the timer is powered on.
- The backlight LED dials for adjustment makes it easy to use in any condition, even in dusty or poorly lit enviroments.
- The built-in testbutton simplifies commissioning and troubleshooting by a push of a button.
RM22TR33 is a controlrelay for measuring 3-phase sequence, fase fault detection and over-/undervoltage.
The measurement is made directly through the supply terminals L1, L2 and L3 on the top of the relay.
The relay has 4 illuminated dials for setting up the relay.
On the top dial you select the measurement range between 380 and 480V.
The value is set to the voltage between 2 phases
The next dial adjust the delay of the output which can be between 0,1 and 30 seconds.
The bottom 2 dials set the maximum over and undervoltage in % in reference to the measuring value on the top dial.
The relay has 2 LED's on the front which indicates if a fault is detected (Def) and the state of the relay output (R).
The testbutton force the output when the timer is powered on.