Schneider Electric
Zelio control relay for liquid level control 5..100kOhm 2C/O 8A 400VAC
- EAN no.: 3606480792335
- LM no.: 7523007020
- Supplier: Schneider Electric
Must login for adding to cart
Description
Type no: RM22LG11MT
Promotion code: 80080463215
UNSPSC (v. 19.0501): 39122331
HS Code: 85364190
The Zelio RM22 control relay range brings to market 2 new key improvements.
- The backlight LED dials for adjustment makes it easy to use in any condition, even in dusty or poorly lit enviroments.
- The built-in testbutton simplifies commissioning and troubleshooting by a push of a button.
RM22LG11MR is a control relay for filling or emptying liquid fluids.
The relays has 3 terminals for connecting individual rods:
C = Reference rod (could be the side of the vessel or a seperate rod)
Min = Low level rod
Max = High level rod
The control relay is supplied by 400 VAC and made for 3-phase applications.
The relay has 3 illuminated dials for setting up the relay.
On the top dial you select the function to either filling or emptying.
Range of the sensitivity is fixed and is from 5k-100kΩ
The sensitivity is adjusted on the middle dial and can be set between 5-100% of the measurement range.
Adjustment of the sensitivity depends on the conductivity of the media and can vary on different medias.
Be aware that if the application contain different medias, the relay should be configured to the media with the lowest conductivity.
On the bottom dial you select if there is 1 or 2 rods in the application.
The LED's on the front shows the status of the contacts.
The testbutton force the output when the timer is powered on.
- The backlight LED dials for adjustment makes it easy to use in any condition, even in dusty or poorly lit enviroments.
- The built-in testbutton simplifies commissioning and troubleshooting by a push of a button.
RM22LG11MR is a control relay for filling or emptying liquid fluids.
The relays has 3 terminals for connecting individual rods:
C = Reference rod (could be the side of the vessel or a seperate rod)
Min = Low level rod
Max = High level rod
The control relay is supplied by 400 VAC and made for 3-phase applications.
The relay has 3 illuminated dials for setting up the relay.
On the top dial you select the function to either filling or emptying.
Range of the sensitivity is fixed and is from 5k-100kΩ
The sensitivity is adjusted on the middle dial and can be set between 5-100% of the measurement range.
Adjustment of the sensitivity depends on the conductivity of the media and can vary on different medias.
Be aware that if the application contain different medias, the relay should be configured to the media with the lowest conductivity.
On the bottom dial you select if there is 1 or 2 rods in the application.
The LED's on the front shows the status of the contacts.
The testbutton force the output when the timer is powered on.