Schneider Electric
Zelio control relay for undervoltage or overvoltage detection 9..15VDC 1C/O 5A
- EAN no.: 3389119405102
- LM no.: 7523006212
- Supplier: Schneider Electric
Must login for adding to cart
Description
Type no: RM17UAS14
Promotion code: 80080463215
UNSPSC (v. 19.0501): 39122332
HS Code: 85371098
Zelio RM17 is a compact series of control relays which is easy to mount on a DIN-rail.
The relays are available for either 1 phase or 3 phase applications and are able to measure the voltage, current, phase-loss, phase-sequence and asymmetry between phases.
With a width of only 17,5 mm they only take up a very limited space on the DIN-rail and they also fit behind the cover of a standard panel.
RM17UAS14 is a control relay for either overvoltage or undervoltage from 9..15 VDC.
The measurement is done directly at the supply terminals in the top and the output contacts are located in the bottom.
On the front of the relay are 4 dials for setting up the relay:
The first dial adjust the function of the relay (overvoltage or undervoltage) and if the relay need to be powered off before resetting the output (memory function).
The second dial adjust the threshold in volt from 9..15 VDC.
The third dial adjust the hysteresis which can be between 5..20%.
The fourth dial adjust the delay of the output from 0,1..10 seconds.
The control relay has a 1 C/O output contact with a maximum load of 5A.
On the front of the relay is 2 LED's for indication of the relay status.
The green LED indicates that the supply is present and the yellow LED indicates the status of the relay output.
The relays are available for either 1 phase or 3 phase applications and are able to measure the voltage, current, phase-loss, phase-sequence and asymmetry between phases.
With a width of only 17,5 mm they only take up a very limited space on the DIN-rail and they also fit behind the cover of a standard panel.
RM17UAS14 is a control relay for either overvoltage or undervoltage from 9..15 VDC.
The measurement is done directly at the supply terminals in the top and the output contacts are located in the bottom.
On the front of the relay are 4 dials for setting up the relay:
The first dial adjust the function of the relay (overvoltage or undervoltage) and if the relay need to be powered off before resetting the output (memory function).
The second dial adjust the threshold in volt from 9..15 VDC.
The third dial adjust the hysteresis which can be between 5..20%.
The fourth dial adjust the delay of the output from 0,1..10 seconds.
The control relay has a 1 C/O output contact with a maximum load of 5A.
On the front of the relay is 2 LED's for indication of the relay status.
The green LED indicates that the supply is present and the yellow LED indicates the status of the relay output.