Schneider Electric
Zelio control relay for voltage detection 15..500V 2C/O 8A 400VAC
- EAN no.: 3606480792267
- LM no.: 7523007169
- Supplier: Schneider Electric
Must login for adding to cart
Description
Type no: RM22UA33MT
Promotion code: 80080463215
UNSPSC (v. 19.0501): 39122331
HS Code: 85364190
The Zelio RM22 control relay range brings to market 2 new key improvements.
- The backlight LED dials for adjustment makes it easy to use in any condition, even in dusty or poorly lit enviroments.
- The built-in testbutton simplifies commissioning and troubleshooting by a push of a button.
RM22UA33MT is a control relay for measuring over-/undervoltage.
The measurement is done through the M and E1/E2/E3 terminals which offers 3 measuring ranges:
M and E1 = 15-150V AC/DC
M and E2 = 30-300V AC/DC
M and E3 = 50-500V AC/DC
The control relay is supplied by 400 VAC and made for 3-phase applications.
The relay has 4 illuminated dials for setting up the function of the relay.
On the top dial you select the function of the relay (overvoltage, undervoltage or both at the same time).
You can also chose if the relay should remember the last measured value in case of a power cut (memory).
On the next dial, the measuring limit can be adjusted between 10 and 100% of the selected range.
The third dial set the hystereses which can be between 5 and 50%.
The bottom dial set the off-delay on the output which can be between 0,1 and 30 seconds.
The LED's on the front shows the status of the contacts.
The testbutton force the output when the timer is powered on.
- The backlight LED dials for adjustment makes it easy to use in any condition, even in dusty or poorly lit enviroments.
- The built-in testbutton simplifies commissioning and troubleshooting by a push of a button.
RM22UA33MT is a control relay for measuring over-/undervoltage.
The measurement is done through the M and E1/E2/E3 terminals which offers 3 measuring ranges:
M and E1 = 15-150V AC/DC
M and E2 = 30-300V AC/DC
M and E3 = 50-500V AC/DC
The control relay is supplied by 400 VAC and made for 3-phase applications.
The relay has 4 illuminated dials for setting up the function of the relay.
On the top dial you select the function of the relay (overvoltage, undervoltage or both at the same time).
You can also chose if the relay should remember the last measured value in case of a power cut (memory).
On the next dial, the measuring limit can be adjusted between 10 and 100% of the selected range.
The third dial set the hystereses which can be between 5 and 50%.
The bottom dial set the off-delay on the output which can be between 0,1 and 30 seconds.
The LED's on the front shows the status of the contacts.
The testbutton force the output when the timer is powered on.