Zelio socket with push-in terminals for RSB relays with 1 C/O contact
- EAN no.: 3606481465733
- LM no.: 7522606008
- Supplier: Schneider Electric
Must login for adding to cart
Description
Type no: RSZE05P
Promotion code: 80080463210
UNSPSC (v. 19.0501): 39122325
HS Code: 85369095
Zelio RSB are a series of plug-in relays with a compact build-size and PCB pins.
The relays are available with 1 C/O contact with either 12A or 16A or 2 C/O contacts with 8A maximum load.
A protection module (diode, varistor or RC-circuit) can be inserted into the socket if needed.
The sockets RSZExxxx has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.
RSZE05P is a socket with separate push-in terminals that fits with RSB relays with 1 C/O contact.
The socket has a width of 16 mm and protection modules can be inserted directly next to the supply terminals.
The integrated holding clip protect the relay from falling out when inserted into the socket.
The socket has push-in terminals for easy wiring without the use of any tool and optimum protection against vibrations.
The RSZE05P fits all RSB1A120xx relays with 12A load.
Additional marking of the socket can be done with the RSZL300 legend which is easily mounted on the sockets.
Each terminal have room for 2 wires with a wire size between 0,5..1,5 mm² and there is a integrated test point built into the socket.
For connecting more than one socket to the same supply, the RSZS02 jumper is inserted next to the A2 terminal and it works across the ranges.
The socket is marked with both NEMA and IEC markings.
The relays are available with 1 C/O contact with either 12A or 16A or 2 C/O contacts with 8A maximum load.
A protection module (diode, varistor or RC-circuit) can be inserted into the socket if needed.
The sockets RSZExxxx has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.
RSZE05P is a socket with separate push-in terminals that fits with RSB relays with 1 C/O contact.
The socket has a width of 16 mm and protection modules can be inserted directly next to the supply terminals.
The integrated holding clip protect the relay from falling out when inserted into the socket.
The socket has push-in terminals for easy wiring without the use of any tool and optimum protection against vibrations.
The RSZE05P fits all RSB1A120xx relays with 12A load.
Additional marking of the socket can be done with the RSZL300 legend which is easily mounted on the sockets.
Each terminal have room for 2 wires with a wire size between 0,5..1,5 mm² and there is a integrated test point built into the socket.
For connecting more than one socket to the same supply, the RSZS02 jumper is inserted next to the A2 terminal and it works across the ranges.
The socket is marked with both NEMA and IEC markings.