Zelio socket with push-in terminals for RXM relays with 2 or 4 C/O contacts
- EAN no.: 3606481465764
- LM no.: 7522605999
- Supplier: Schneider Electric
Must login for adding to cart
Description
Type no: RXZE14P
Promotion code: 80080463210
UNSPSC (v. 19.0501): 39122325
HS Code: 85369095
Zelio RXM are a series of industrial plug-in relays, designed for both simple and complex automation systems.
The relays are available with 2 C/O (12A), 3 C/O (10A) or 4 C/O (6A) contacts and it is possible to get them with lockable testbutton and status LED.
A special 4 C/O version with gold plated contacts for low energy switching is also available.
A protection module (diode, varistor or RC-circuit) can be inserted into the socket if needed.
The sockets are availble with either mixed terminals or with seperate terminals depending on the prefered solution.
RXZE14P is a relay socket for mounting on a DIN-rail with separate push-in terminals and compatible with RXM plug-in relays with 2 or 4 C/O contacts.
In the bottom of the socket are the terminals for the coil supply and in the top are all the terminals for the contacts.
The socket has push-in terminals for easy wiring without the use of any tool and optimum protection against vibrations.
The width of the socket are 31 mm and it is possible to insert protection modules next to the supply terminals.
RXZE14P has a maximum load of 12A when used with a RXM2 relay and 6A when used with a RXM4 relay.
Additional marking of the socket can be done with the RXZL300 legend which is easily mounted on the sockets.
Each terminal have room for 2 wires with a wire size between 0,5..1,5 mm² and there is a integrated test point built into the socket.
For connecting more than one socket to the same supply, the RSZS02 jumper is inserted next to the A2 terminal and it works across the ranges.
The socket is marked with both NEMA and IEC markings.
The relays are available with 2 C/O (12A), 3 C/O (10A) or 4 C/O (6A) contacts and it is possible to get them with lockable testbutton and status LED.
A special 4 C/O version with gold plated contacts for low energy switching is also available.
A protection module (diode, varistor or RC-circuit) can be inserted into the socket if needed.
The sockets are availble with either mixed terminals or with seperate terminals depending on the prefered solution.
RXZE14P is a relay socket for mounting on a DIN-rail with separate push-in terminals and compatible with RXM plug-in relays with 2 or 4 C/O contacts.
In the bottom of the socket are the terminals for the coil supply and in the top are all the terminals for the contacts.
The socket has push-in terminals for easy wiring without the use of any tool and optimum protection against vibrations.
The width of the socket are 31 mm and it is possible to insert protection modules next to the supply terminals.
RXZE14P has a maximum load of 12A when used with a RXM2 relay and 6A when used with a RXM4 relay.
Additional marking of the socket can be done with the RXZL300 legend which is easily mounted on the sockets.
Each terminal have room for 2 wires with a wire size between 0,5..1,5 mm² and there is a integrated test point built into the socket.
For connecting more than one socket to the same supply, the RSZS02 jumper is inserted next to the A2 terminal and it works across the ranges.
The socket is marked with both NEMA and IEC markings.